Fibre Termination Kit 22pcs | OPM -70 to +10dBm, 15mW VFL | AUA-6C Cleaver

This 22-piece FTTH fibre termination kit packs a rechargeable optical power meter (-70 to +10dBm, 10 wavelengths), a rechargeable 15mW visual fault locator, an AUA-6C fibre cleaver and the strippers and accessories needed to prepare fibre for cold connectors or fusion splicing, all in a zipped shoulder bag. The mini power meter covers 10 test wavelengths with wavelength memory, network (RJ45) cable testing and an LED light, through a 2.5mm universal SC/FC/ST port. The metal-bodied 15mW VFL uses the same 2.5mm SC/FC/ST interface and switches between CW, OFF and GLINT. The AUA-6C cleaver has an automatic knife return and a three-in-one fixture for hot melt and cold joint work, and comes with its own anti-drop bag. For stripping there is a CFS-3 three-port stripper (2 to 3mm jacket, 900 to 250um buffer, 250 to 125um coating), a plastic drop cable stripper for 1 or 2 core indoor and outdoor cable, a fixed length device for cold connectors and CR13 stainless steel aramid scissors. Features and Benefits - Test and termination in one bag: meter, fault locator, cleaver and strippers for a full FTTH drop. - Optical power meter, -70 to +10dBm with 10 wavelengths and RJ45 testing: check light levels and LAN cables on the same visit. - 15mW VFL with CW and flashing modes: find breaks and bends in patch cords and drops. - AUA-6C cleaver with automatic knife return: consistent cleaves for hot melt and cold joint fixtures. - CFS-3 three-port stripper and drop cable stripper: take a drop cable down to 125um bare fibre. - Fixed length device: sets the right fibre length for cold connectors. - Shoulder bag of 24 x 18 x 10 cm with waterproof treatment on both sides. Applications - FTTH drop installation and field-assembled cold connectors. - Fibre preparation before fusion splicing. - Power level checks and fault finding at the ONT or patch panel. - Starter kit for new fibre technicians and training. In the box - Tool bag, rechargeable optical power meter, rechargeable 15mW VFL, AUA-6C fibre cleaver with anti-drop bag, drop cable stripper, CFS-3 three-port stripper, aramid scissors. - VFL pen case, lanyard, ceramic core and metal pen tip, 2 charging lines, fixed length device, alcohol bottle (empty), dust-free paper, 2 adjusting wrenches. Note: The VFL emits a laser. Never look into the laser output or a live fibre end. Bare fibre offcuts are sharp, so collect them in a fibre waste container.