Fibre Cleaver FC-6S | Metal Body, 3-in-1 Fixture | 16-Face Blade

The FC-6S is a compact metal fibre cleaver for 125µm fibre with 0.25mm and 0.9mm coatings, built for cold connection (mechanical connector) work and splice preparation. Its three-in-one fixture has grooves for 0.25mm bare fibre, 0.9mm tail fibre and 2.5 to 3.0mm leather cable, and the 16-face tungsten steel blade is rated for about 32000 cuts. Features and Benefits - Three-in-one fixture - bare fibre, pigtail and leather (drop) cable in one clamp, no fixture swaps. - Automatic tool return - the blade slide returns by itself when the upper cover is opened. - 16 cutting end faces on a tungsten steel blade - turn to a fresh face as each one dulls, about 32000 cuts in total. - Magnet in the upper cover and steel pressure pads - the lid shuts firmly and the fibre is held still for the cut. - Rubber anti-skid base - stays put on a bench or splice tray. - Rated for -40 to 80°C - the published operating and storage range. - Compact 65 x 58 x 61mm body at about 273g - fits an FTTH tool bag. Applications - Fitting mechanical fast connectors in FTTH drops. - Preparing fibre ends for fusion splicing. - Pigtail and patch lead repairs at the cabinet. - Training kits for new fibre technicians. In the box FC-6S cleaver (cutting knife), hexagon knife wrench, instruction manual, anti-falling bag and packing box. Note: Follow the label printed on the tool and check the blade is on your side before laying in the fibre. Fibre offcuts are sharp; collect them in a sealed container and wear safety glasses.