K-Type Thermocouple | -50C to 1200C Range | 100mm to 500mm Probe Options

This K-Type thermocouple measures temperatures from -50°C to 1200°C. It's a temperature probe that connects to compatible controllers and meters. You get accurate data for kilns, ovens, and other industrial equipment. Features and Benefits - Wide temperature range - It measures from -50°C to 1200°C. This works for processes like forging and heat treating. - 304 stainless steel probe - The probe body resists corrosion and high heat. This helps it last longer. - Multiple probe lengths available - Pick from 100mm to 500mm. You can get the right reach for your setup. - Insulated wire cable - A steel-braided exterior protects the internal wiring. This gives a steady signal from the sensor to your controller. Applications - Checking and adjusting temperature in an industrial oven or furnace. - Getting exact readings for pottery or glass kilns. - Using it in metalworking for annealing, tempering, and casting. What It Is This K-Type Thermocouple is a temperature sensing device designed for a wide range of industrial and commercial applications. It is compatible with temperature controllers and features a K-Type thermocouple for accurate readings. The probe itself is available in various lengths, from 100mm to 500mm, allowing for flexibility in different setups. It is designed to measure temperatures across a substantial range, from -50°C up to 1200°C, making it suitable for both low and high-temperature environments where precise monitoring is crucial. Key Uses & Applications The K-Type Thermocouple is primarily used for accurate temperature measurement and control when connected to a compatible temperature controller. Its broad temperature range makes it suitable for ovens, furnaces, kilns, and other high-temperature industrial processes. It is also applicable in HVAC systems, laboratory equipment, and general manufacturing for process monitoring. While not designed for cleaning, a similar device in a water heater might need cleaning if soot builds up on the probe, affecting its ability to sense the pilot light. How to Choose When selecting a K-Type Thermocouple, consider the required probe length from the available options: 100mm, 150mm, 200mm, 300mm, or 500mm. This choice depends on the depth required to accurately measure the temperature within your specific application. Ensure the thermocouple's temperature range of -50°C to 1200°C is suitable for your intended use. Verify compatibility with your existing temperature controller to ensure proper function and accurate display of temperature readings. Grit / Spec Guide This K-Type Thermocouple features a specific temperature range of -50°C to 1200°C and is available with probe lengths of 100mm, 150mm, 200mm, 300mm, and 500mm. It is a K-Type thermocouple, which dictates its electrical characteristics and temperature measurement principles. The probe is designed for compatibility with temperature controllers. There are no grit specifications as this is a temperature sensing device, not an abrasive. The stainless steel construction of the probe provides durability for various environments. Care & Safety To ensure longevity, handle the K-Type Thermocouple with care, especially the probe and the lead. Avoid bending the probe sharply, as this can damage the internal wiring. When connecting, ensure the connector is securely attached to the temperature controller. Regular visual inspection of the probe for any signs of damage or corrosion is recommended. For similar devices in gas appliances, like a water heater or a gas fireplace, cleaning involves carefully wiping soot from the probe, but this product itself is not designed for such cleaning. Replacement of a thermocouple on a gas fireplace typically involves disconnecting the old one and installing a new one according to manufacturer instructions.