K-Type Thermocouple Probe | Exhaust Gas Temp | 1/8 NPT Thread with 2m Cable

This K-type thermocouple is an EGT sensor. It measures your engine's exhaust gas temperature. It gives you data for tuning. This helps protect your engine from heat damage. It also helps optimize fuel use. This EGT sensor works in many vehicles. Features and Benefits - K-type thermocouple probe - Reads a wide temperature range. It suits high-performance and diesel engines. - Standard 1/8 NPT threads - Installs easily in most exhaust manifolds or pipes. - 2-meter braided steel cable - Lets you route the wire to your gauge. It protects the wire from heat and wear. - Exposed tip design - Responds quickly to temperature changes. This is important for tuning and racing. Applications - Performance Tuning - Check your air-fuel ratio. Prevent engine damage on turbo or supercharged cars. - Diesel Engine Monitoring - Watch the exhaust temp. This protects the turbo and manages the diesel particulate filter (DPF). - General Automotive Use - Add an exhaust gas temperature sensor to any modified vehicle. Get a clearer view of engine health. What It Is This is a K-Type Thermocouple Probe, specifically designed for measuring exhaust gas temperature. It features a 1/8 NPT thread for secure installation and comes with a 2m cable for flexible positioning. As a thermocouple, it generates a voltage that varies with temperature, allowing for accurate readings when connected to a compatible display gauge or temperature controller. The probe is built for demanding environments where high temperatures are present, such as exhaust systems. Key Uses & Applications The primary application for this K-Type Thermocouple Probe is exhaust gas temperature measurement. This is crucial in automotive tuning, engine diagnostics, and industrial processes where monitoring exhaust heat is vital for performance and safety. While this specific probe is for exhaust gas, thermocouples in general are used in ovens, furnaces, and HVAC systems. The 1/8 NPT thread makes it suitable for direct installation into appropriately threaded ports. How to Choose When selecting a thermocouple, consider the intended application and the required temperature range. This K-Type probe is specified for exhaust gas temperature. The 1/8 NPT thread size is important for compatibility with existing fittings. The 2m probe length dictates how far the sensor can extend from its connection point. Ensure your display gauge or temperature controller is compatible with K-Type thermocouples for accurate readings. Grit / Spec Guide This K-Type Thermocouple Probe features a 1/8 NPT thread. The sensor type is a thermocouple, specifically a K-Type. It is designed for exhaust gas temperature applications. The probe length is 2m. When installing, ensure the 1/8 NPT thread is correctly seated to prevent leaks. The 2m cable provides flexibility for routing to a display gauge or temperature controller. Always check the specifications of your receiving device for K-Type compatibility. Care & Safety This K-Type Thermocouple Probe is designed for exhaust gas temperature measurement. Do not attempt to clean a water heater thermocouple with this probe; this product is not designed for that purpose. For safety, ensure the probe is securely installed using its 1/8 NPT thread. When replacing a thermocouple on a gas fireplace, ensure you are using a thermocouple specifically designed for that appliance and follow the manufacturer's instructions. Always disconnect power before working on electrical components.