Motion Sensor Bracket | Automatic IR Lamp Holder | 110-240V AC

This E27 motion sensor light socket adds automatic, hands-free lighting to any standard fixture. The adjustable sensor bracket contains a PIR detector that turns your light on when you enter a room and off after you leave, helping to save energy and add convenience to your home. Features and Benefits - Passive Infrared Sensor - Detects body heat and movement up to 6 meters away for reliable, hands-free activation. - Adjustable Settings - You can set the time delay (10 seconds to 5 minutes) and ambient light sensitivity for custom operation. - Simple Screw-In Installation - Fits any standard E27 base, upgrading your fixture in seconds with no wiring or tools needed. - Broad Compatibility - Works with an AC110-240V range and most E27 LED bulbs up to 60W, making it a simple fit for most homes. Applications - Garages and Basements - Provides instant light when you walk in, so you're not searching for a switch in the dark. - Stairs and Hallways - Illuminates your path automatically, which is helpful when your hands are full. - Closets and Pantries - Turns on as you open the door and off when you close it, preventing wasted electricity. What It Is This is an automatic infrared (IR) lamp holder designed to add motion sensing capabilities to a standard E27 light fitting. It functions as a sensor bracket, integrating a human body sensor directly into the lamp base. When connected to an AC 110-240V power supply, it automatically switches on a connected E27 lamp upon detecting movement. This product is not a smart device but provides a simple, effective automation solution for lighting. Key Uses & Applications The Motion Sensor Bracket is ideal for automating lighting in areas where illumination is only required when someone is present. Common applications include hallways, stairwells, utility rooms, storage cupboards, and porches. It ensures lights are only active when needed, potentially saving energy. Its E27 lamp base compatibility means it can be easily integrated with a wide range of standard light bulbs, transforming them into motion-activated lights. How to Choose When selecting a sensor bracket, consider the input voltage compatibility, which for this product is AC 110-240V. Ensure the lamp base matches your bulbs; this unit uses an E27 fitting. The sensor type is infrared, detecting human body movement. While this product is not a smart device, its simplicity makes it suitable for straightforward automation needs. There is no M12 connector on this device, which refers to a circular electrical connector with a 12 mm screw thread, commonly used in industrial automation for sensors and actuators. This product does not require such a connector. Grit / Spec Guide This motion sensor bracket operates on an AC 110-240V input voltage, making it suitable for standard UK mains electricity. It features an E27 lamp base, which is a common screw-in fitting for light bulbs. The integrated sensor is an infrared (IR) human body sensor, designed to detect movement within its range. It is classified as a sensor bracket. There are no M12 connector specifications for this product as it does not utilise an M12 connector. The product is not a smart device, offering a basic, reliable automation function. Care & Safety Always ensure the power supply is disconnected before installing or removing the motion sensor bracket. This product is designed for AC 110-240V input; connecting it to the wrong voltage could cause damage or pose a safety risk. Ensure the E27 lamp is correctly screwed into the holder. Avoid exposing the sensor to direct water or extreme temperatures. Do not attempt to modify the internal wiring. This device does not use an M12 connector, so there is no need to consider the cable type for such a connector; ensure the correct electrical cable is used for installation.