Diesel Transfer Pump | 60L/Min Flow Rate | 12V 24V 130W DC Motor

Move fuel quickly in the field with this high-capacity diesel transfer pump. Running on 12V or 24V DC power, the 130W motor moves up to 60 liters per minute. It connects directly to your vehicle battery with insulated alligator clips for fast refueling anywhere. Features and Benefits - 60 liter per minute flow rate - Empties a standard 55-gallon drum in under four minutes to reduce machinery downtime - Direct battery clamps with in-line switch - Clips to any vehicle or tractor battery so you can work far from wall outlets - Submersible stainless steel housing - Drops straight into drum openings, intermediate bulk containers, and storage tanks for fast self-priming - Removable bottom strainer - Filters out large particulates when moving diesel or clean water, keeping your transfer lines clear Applications - Emergency roadside refueling of construction machinery, diggers, and farm tractors - Transferring non-volatile liquids like diesel, kerosene, or bilge water out of storage containers - Draining flooded engine bays, tanks, and sumps on job sites without utility power Key Compatibility Differences A diesel transfer pump is not suitable for petrol or volatile spirits. Buyers often ask why fuel transfer pumps cannot handle gasoline, and the reason comes down to flash points and motor design. Petrol produces highly explosive vapours even below 43°C or down past 45°F, requiring specialised explosion-proof casings and spark-free switches. This DC submersible unit is engineered specifically for diesel, clean water, and sewage. Running petrol through standard diesel transfer equipment creates a severe fire risk and will quickly degrade the internal seals. Always match the fluid density and volatility strictly to the pump rating. What It Is A diesel transfer pump is a dedicated mechanical unit designed to move bulk fuel from storage containers into plant machinery, commercial vehicles, or site tanks. This model features a 130W submersible motor running on 12V or 24V DC power, delivering a rapid flow rate of up to 60 L/min. Because it submerses directly into the liquid, it pushes fluid upward rather than relying on high suction lift, which reduces the risk of cavitation. It provides tradespeople with a portable, battery-powered method for decanting fuel drums and fluid reservoirs without requiring mains electricity. Key Uses & Applications This unit handles heavy-duty fluid management across agricultural settings, plant hire yards, and construction sites. Key uses include: - Fast refuelling of excavators, tractors, and site generators directly from mobile bowsers or standard drums. - Moving diesel stock between storage vessels at up to 60 L/min to keep fleet downtime to a minimum. - Pumping out clean water reservoirs, sump pits, or holding tanks on remote jobsites. - Clearing contaminated water and light sewage where standard clean-water utility pumps would clog.