Transfer Pump Submersible | 12V 24V Stainless Steel | 30L/min Flow

This submersible diesel transfer pump moves fluids at up to 30 liters per minute. Powered by standard 12V or 24V vehicle batteries, the stainless steel body resists corrosion while draining storage drums or refueling equipment quickly. It handles diesel, light kerosene, and water without priming hassles. Features and Benefits - Stainless steel casing - Protects internal motor parts against rust and accidental drop damage. - Removable bottom filter screen - Keeps dirt and particulates out of your machine tanks. - Battery alligator clips with power switch - Connects directly to vehicle batteries for fast roadside use. - High-flow 30L per minute motor - Empties a 200-liter drum in about seven minutes. Applications - Refueling tractors, excavators, and agricultural equipment directly from fuel barrels on site. - Emptying kerosene heaters or bulk heating fuel storage containers before seasonal maintenance. - Pumping fresh water out of flooded utility sumps, bilges, or outdoor holding tanks. Key Compatibility Differences A diesel transfer pump is engineered strictly for heavier, oily liquids such as standard road diesel, kerosene, and general machinery oils. A frequent site query is: can you use a diesel transfer pump for gasoline? The answer is no. You must never run petrol through this unit. Petrol ignites at a very low flash point, whereas standard diesel requires higher compression or temperatures above 43°C (around 110°F) to produce hazardous vapour. Submersible 12V and 24V DC electric motors lack the internal spark isolation needed for volatile fuels, explaining why are fuel transfer pump not suitable gasoline without specialist explosion-proof certification. What It Is Asking what is a diesel transfer pump on site simply refers to a dedicated fluid-scavenging unit designed to move fuel safely between storage and machinery. This specific model is a fully submersible electric tool, built with a durable stainless steel outer casing to resist corrosion and site wear. Powered by a standard 12V or 24V DC battery supply, the motor drives an internal impeller capable of delivering a steady flow rate of up to 30 L/min. Because the unit drops directly into the fluid, it pushes fuel out rather than pulling it, minimising air locks and priming delays. Key Uses & Applications This unit is designed for rapid fluid handling around plant yards, agricultural workshops, and mobile service vans: - Transferring diesel directly from storage drums, IBCs, or barrels straight into diggers, tractors, and site generators. - Decanting bulk kerosene supplies into site space heaters during cold weather, well below 45°F. - Draining engine oil, hydraulic oil, or machinery fuel tanks during workshop servicing and repairs. - Moving fuel from static holding tanks into vehicle tanks without manual siphoning. Drop the stainless steel body directly to the bottom of the container before connecting power, ensuring continuous fluid coverage to maintain the 30 L/min flow.