Diesel Transfer Pump | Multi-Watt Portable Submersible | 12V 24V Camping

This submersible transfer pump shifts liquids without manual priming. It runs on a 12-volt battery and pushes water, diesel, or thin oils at up to 30 liters per minute. You can clip it right to your vehicle battery to refuel equipment or pump out standing water. Features and Benefits - Stainless steel pump casing - Fights off rust when submerged in fuel, fresh water, or seawater. - Copper motor with thick wiring - Keeps current steady and runs cool through full tank transfers. - Battery alligator clips - Connect straight to terminal posts on your truck or tractor in seconds. - Removable bottom filter screen - Catches dirt before it enters the line and rinses clean under a tap. Applications - Barrel fuel transfer - Drops into barrels to fill tractors, excavators, and diesel backup generators. - Boats and off-grid camps - Pumps out boat bilges and moves water between portable camping jugs. - Tank drainage - Empties flooded utility pits, water basins, and open storage drums quickly. Key Compatibility Differences Voltage options include 12V and 24V configurations, alongside power ratings of 100W, 180W, or 260W to suit different battery setups. Fluid compatibility is limited to diesel, water, wine, and oil. A common buyer question is: can you use a diesel transfer pump for gasoline? The answer is strictly no. Why are fuel transfer pumps not suitable for gasoline? Petrol has a low flash point and creates volatile vapours that ignite from motor brushes or static. Even running in cold 45°F conditions or warm 43°C ambient heat, using this unit for petrol risks an explosion. Always match the power draw to your supply. What It Is What is a diesel transfer pump? It is a dedicated fluid-moving tool engineered to shift heavier fuels and liquids between tanks and drums. This specific unit is a portable submersible pump operating at an internal motor speed of 8500 rpm. Unlike external suction units that sit inline, this tool drops directly into the container or reservoir. The sealed motor housing draws fluid through the base and pushes it out through your delivery hose, eliminating manual priming. It handles thicker viscosities like diesel and light oils without losing prime, providing steady transfer for automotive workshops, off-grid sites, and mobile trade rigs. Key Uses & Applications This pump covers automotive, camping, and marine jobs where mains power is unavailable. It is typically used for: - Emptying diesel storage barrels into plant machinery, vans, or tractors - Draining engine oil or transferring fresh oil supplies - Bailing out standing water from bilge areas, marine hulls, or footings - Pumping potable water or wine for off-grid catering, camping, and remote setups Keep the intake clear of swarf and heavy silt. Avoid running the unit dry, as liquid flow keeps the motor cool during high-rpm operation. Monitor transfer rates when moving cold oil versus free-flowing water.