Pump Kit with Refueling Gun | 4m Hose Stainless Steel | 12V 24V 51mm

This submersible fuel kit includes a 51mm stainless steel pump, manual delivery nozzle, and four meters of wire-reinforced hose. It runs off any 12V or 24V vehicle battery, moving diesel, kerosene, or plain water without buying extra fittings. Features and Benefits - Full kit with 4-meter hose and manual nozzle - Lets you shut off flow right at the filler neck to prevent spills. - 51mm stainless steel casing - Handles bumps and resists rust while fitting into drums, barrels, and IBC totes. - Removable mesh intake screen - Traps tank sediment and unscrews by hand when you need to rinse it out. - Insulated battery clamps with power switch - Clamps onto truck or tractor battery posts for field refueling. Applications - Filling excavators, site generators, and work trucks from mobile bed-mounted tanks. - Pumping diesel out of 55-gallon drums into mowers, tractors, and work vans. - Moving non-potable water out of holding tanks, rain barrels, or boat bilges. Key Compatibility Differences A diesel pump kit is built specifically for heavier fluids like diesel, general fuel oils, and water. A frequent trade question is whether you can use a diesel transfer pump for gasoline. The answer is strictly no. Petrol has a low flash point well below 43°c and even below 45°f, producing volatile vapours that standard submersible motors cannot safely manage. This explains why fuel transfer pump models rated for diesel are not suitable gasoline units, as petrol requires specialised explosion-proof motors and seals. Running petrol through this gold-finish stainless steel assembly creates a serious fire hazard and degrades internal seals designed strictly for diesel and water. What It Is A diesel transfer pump is a dedicated mechanical device designed to siphon and shift fuel from bulk storage directly into machinery, vehicles, or holding tanks. This product type is a complete portable 12V and 24V diesel pump kit featuring a 51 mm diameter submersible body constructed from corrosion-resistant stainless steel. It connects directly to low-voltage power supplies to deliver off-grid fluid movement on site. Supplied with a 4 m hose and a matching refueling gun, the kit provides an all-in-one setup that allows operators to access deep barrels and dispense fluid cleanly without splashing or airlocks. Key Uses & Applications This pump kit handles rapid fluid shifting across plant, transport, and agricultural environments. Typical trade applications include: - Transferring diesel directly from storage barrels or site bowsers into plant machinery, commercial vehicles, and backup generators. - Moving clean water out of flooded footings, sumps, or site containers where a compact 51 mm diameter tool is required. - Dispensing fuel accurately into plant tanks using the attached 4 m hose and refueling gun without manual pouring. Always inspect hose connections before connecting to 12V or 24V power, and never run the pump dry inside empty drums.