Fuel Transfer Pump | 45L/Min Submersible Unit | 12V 24V 150W DC

This submersible fuel transfer pump moves 45 liters per minute for clean liquid transfers. The compact 150W DC motor drops directly into narrow jerry cans and 55-gallon drums, making liquid movement simple on remote worksites. Features and Benefits - Narrow housing profile - Slips easily into standard jerry can spouts and small bung holes for fast fluid extraction - 150W motor with 45L per minute output - Balances steady fluid flow with lower electrical draw to extend vehicle battery life - Detachable mesh filter base - Traps dirt before it hits the impeller and twists off easily for cleaning - Direct battery alligator clips - Lets you power the unit from any 12V or 24V truck or tractor battery without adapters Applications - Moving fuel from 20-liter jerry cans into mowers, compact tractors, and utility vehicles - Pumping fresh water or diesel between secondary storage containers and stationary farm equipment - Clearing residual fluid and clean bilge water from utility boats and rural drainage basins Key Compatibility Differences A diesel transfer pump cannot be used for gasoline. Petrol has a low flash point below 43°c and vaporises rapidly even down at 45°f, creating explosive fumes. Submersible units like this lack the intrinsically safe, explosion-proof motor casings required for volatile fluids, which is why standard fuel transfer pumps are strictly not suitable for gasoline. This specific unit is engineered to handle diesel, standard fuel oil, clean water, and sewage without motor degradation. Swapping fluids between fuel and water requires a thorough system flush to prevent cross-contamination, while running petrol through this mechanism poses an immediate fire hazard. What It Is A diesel transfer pump is a self-contained fluid handling tool designed to move liquid volumes between supply drums, plant tanks, and on-site machinery. This unit is a 54 mm diameter submersible pump running on a 12V or 24V DC supply, powered by a 150W motor. Designed to drop directly into standard barrels, fuel drums, or site sumps, it delivers a flow rate of up to 45 L/min. Operating fully submersed allows the liquid itself to help dissipate motor heat during operation, providing continuous delivery without relying on external suction lines. Key Uses & Applications - Rapid on-site refuelling of plant machinery, diggers, generators, and tractors from 12V or 24V vehicle batteries. - Transferring diesel and heating fuels between storage barrels, bowsers, and intermediate bulk containers. - Draining standing site water, footings, and shallow trenches during groundwork. - Moving sewage, wastewater, or dirty runoff out of holding sumps and inspection chambers. - Emptying vehicle fuel tanks during maintenance or mechanical repairs, strictly excluding petrol systems. - Fast liquid decanting where the narrow 54 mm body must clear small tank access bungs to reach bottom sediment.