Compressor Parts Gasket Set | 3 Piece Valve Plate Seals | Types A, B, C

This compressor parts gasket set is a pack of 3 black plastic valve plate gaskets for the cylinder head of an air compressor pump. The seals sit between the head and the valve plate to close the joint when the pump is rebuilt, and the set comes in three shapes, A, B and C, chosen in the options to match the part you are replacing. Features and benefits: - 3 gaskets in each set, so the head joint and valve plate joint can be resealed in one job - Three types to choose from, A, B or C, with drawn dimensions that let you compare against the old gasket before ordering - Plastic construction in black, thickened sheet form for the cylinder head to valve plate joint - Drawn sizes include hole spacings of 42mm, 45mm and 47mm and a 48mm width, which helps you check fit with a rule or calipers - Flat, light parts that are easy to store in a workshop spares drawer Applications: - Rebuilding a piston air compressor pump head - Replacing a worn or leaking cylinder head gasket on a workshop compressor - Servicing a valve plate and reed valve assembly - Keeping spare seals for maintenance of oil and air pumps In the box: 3 x valve plate gasket washers (type A, B or C as selected) Note: Check your old gasket against the drawn dimensions before ordering, as the supplier asks for allowance of small manual measurement differences. Isolate and depressurise the compressor and let the pump cool before taking the head off. Colour may differ slightly from the photos.