Air Compressor Head Gasket Set | 3 Pieces | 51, 65, 80, 90, 95 Type

This air compressor parts gasket set contains 3 flat cylinder head gaskets for small piston compressor pumps, supplied in your choice of 51 Type, 65 Type, 80 Type, 90 Type or 95 Type. Each set is made from plastic gasket material and is used to seal the joint between the valve plate and the cylinder head during a pump service. Features and benefits: - 3 gaskets in every set - enough to seal the head joint and keep spares for the next rebuild - Five type options: 51, 65, 80, 90 and 95 Type, so you can match the gasket to your pump size - Flat plastic construction - a straightforward refit when the head is off - Round and square outlines in the range, with published dimensions such as 46mm, 62mm, 72mm, 81mm and 106mm on the round types - Square gaskets of 70mm, 75mm and 90mm on the matching types - check the outline against your old gasket before ordering - Colour varies between sets (green and black, blue and grey as shown) - the colour does not change the fit Applications: - Replacing a leaking or blown cylinder head gasket on a small piston air compressor - Compressor pump rebuilds alongside new reed valves and piston rings - Workshop and garage air compressor servicing - Keeping spare seals for belt drive and direct drive compressor pumps In the box: 3 x valve plate gaskets (one set of 3 pieces in the type you choose). Note: Choose the type by measuring your old gasket and comparing it with the sizes listed here. Isolate the compressor from power and release all air pressure before taking the head off. Clean both mating faces before fitting the new gasket.