K-Type Thermocouple Sensor | M12 Removable Thread | 0-600℃, 5M Shielded

This M12 thermocouple temperature sensor sends accurate temperature readings to your industrial controller. It has a standard M12 connector and a shielded wire to guard the signal from electrical noise. Pick a K-type or E-type element to best fit your temperature range and precision needs. Features and Benefits - K-type and E-type choices - Select the M12 K type thermocouple for a wide range up to 600°C, or the E-type for more sensitivity in moderate temperature uses. - Shielded thermocouple wire - The shielding stops electromagnetic noise from motors or power lines from messing with the temperature signal, ensuring a correct reading. - Removable M12 threads - This design allows for flexible mounting. You can screw the sensor into a threaded port or clamp it onto a surface like a pipe or block. - Various cable lengths - The M12 thermocouple wire comes in lengths from 1 to 5 meters. This lets you connect to your controller without needing splices or extra wire. What It Is This K-Type Thermocouple Sensor features an M12 removable thread and is designed for temperature measurement within a 0-600℃ range. It is supplied with a 5M shielded lead. The thermocouple is a K-type, though E-type is also available. The probe has an M12 diameter and the lead is buckle shielded. This sensor is essential for accurate temperature monitoring in various industrial and commercial settings. Key Uses & Applications This K-Type Thermocouple Sensor is suitable for a wide range of temperature sensing applications. Its 0-600℃ range makes it ideal for monitoring processes where heat is a critical factor. The M12 removable thread allows for flexible installation and replacement. The buckle shielded wire protects the lead in demanding environments. It can be connected to a display gauge or temperature controller for continuous monitoring. How to Choose When selecting a thermocouple, consider the required cable length, which is available in 1m, 2m, 3m, 4m, or 5m for this product. Ensure the M12 probe diameter is compatible with your existing setup. The temperature range of 0-600℃ should meet your application's needs. Choose between K-type and E-type thermocouples based on your equipment's requirements. The removable thread allows for easy installation and maintenance. Grit / Spec Guide This thermocouple features an M12 probe diameter, ensuring a secure fit in compatible ports. The temperature range is precisely 0-600℃. The cable is buckle shielded wire for durability and noise reduction. Available cable lengths are 1m, 2m, 3m, 4m, and 5m. This product is a K-type thermocouple, with E-type also available. The thread is removable, facilitating installation and replacement of the probe. Care & Safety Ensure the thermocouple is correctly installed with the M12 removable thread secured to prevent inaccurate readings or damage. The buckle shielded wire should be protected from sharp edges or excessive bending. Regularly check the lead for signs of wear or damage to maintain accurate temperature readings. If a water heater thermocouple needs cleaning, this typically involves gently wiping the probe surface to remove any build-up, rather than using abrasive methods. Replacement of a gas fireplace thermocouple usually involves disconnecting the old one and installing a new probe, ensuring the connection to the display gauge or controller is firm.