Pressure Washer Hose Connector M22 14mm | Brass Swivel | 360 Degree

This brass pressure washer hose connector is a swivel joint with an M22 male end and an M22 female end, fitted for 14mm pressure washer outlets and hoses. The joint turns through 360 degrees, so the hose can follow the work without twisting or kinking at the gun or the machine. Features and benefits: - M22 14mm male plus M22 female swivel - joins a gun to a hose or a hose to a hose where both ends use the metric M22 thread - 360 degree rotation - lets the hose turn freely and reduces stress on the tool, the hose and the operator - Kink free swivel action - stops the hose twisting up while you spray - Brass body - resists corrosion on wet jobs and in regular washdown use - 14mm inside diameter on the male end - made to match M22 14mm fittings only - Single piece swivel joint - one compact fitting added in line, with no extra tools listed Applications: - Fitting between a pressure washer gun and its hose - Joining two hose lengths with M22 threaded ends - Reducing hose twist during vehicle, patio and wall cleaning - Replacing a worn or seized fixed M22 coupler on a workshop or contractor washer In the box: 1 x swivel joint. Note: Check your machine before buying. This fitting has a 14mm inside diameter. If your pressure washer outlet or hose end is the M22 15mm type, it may leak, and it is not compatible with M22 15mm fittings. Pressure washers can discharge at high pressure and cause serious injury, so keep the spray away from people and never point it at any part of the body.