Pressure Washer Hose Adapter M22 | 1/4 or 3/8 Inch Male | 5000 PSI

This brass pressure washer hose adapter turns a female M22 connection into a 1/4 inch or 3/8 inch male fitting, and the body is marked 5000 PSI. The seller lists a limit of 300°F as well. It goes on the gun, wand, hose and pump connections of a pressure washer, and comes in M22-14mm and M22-15mm versions to suit the hose end you are fitting. Features and benefits: - Marked 5000 PSI on the body, with a 300°F temperature limit: the rating is easy to check before you couple it to a hose or gun. - Brass body: chosen for corrosion resistance on wet, regularly used pressure washer connections. - Rubber grip on the adapter: adds friction between fingers and fitting and helps stop scratched fingers when tightening. - 7/8 inch (22mm) nut connection: the M22 end joins the metric thread found on many pressure washer hoses, guns and pumps. - Choice of bore and outlet: M22-14mm has a 9/16 inch (14mm) inner bore and M22-15mm has a 15mm inner bore, with 1/4 inch male or 3/8 inch male outlets shown. - Compact spare part: small enough to keep in the van or tool box as a replacement fitting. Applications: - Joining a pressure washer hose to a gun or wand with a different thread - Replacing a worn or lost fitting on a pump outlet - Mobile cleaning and workshop pressure washers - Hose repairs where the end fitting needs changing Note: Check the thread and bore of your existing fittings against the M22-14mm or M22-15mm version and the 1/4 or 3/8 inch male choice before ordering. Never go above the 5000 PSI marking or the 300°F limit, and depressurise the machine before changing any connection.