Pressure Washer Hose Adapter M22 to 3/8 Quick Connect | 5000 PSI

This pressure washer hose adapter set joins M22 threaded fittings to 3/8 inch quick connect couplings, so a hose, pump or gun can be fitted and released without tools. The set is a brass quick connect coupling paired with a stainless steel 3/8 inch plug, marked for a working pressure of 5000 PSI. The model is listed as M22-14mm/15mm to 3/8, and the M22 end is labelled with a 14mm bore. Features and benefits: - Brass quick connect body and stainless steel plug - resists rust and keeps the fitting usable in wet workshop conditions - 3/8 inch quick connect on one side and M22 male thread with a 7/8 inch (22mm) hex on the other - converts a screw fitting into a push and release joint - Rated to 5000 PSI - suits most pressure washer guns, pumps and hoses with M22 connections - M22 end with a 9/16 inch (14mm) bore - check it against the inside diameter of your own fitting to avoid leaks - Quick connect body 2.1 inch high and 1.4 inch wide, plug 1.7 inch high and 0.9 inch wide - compact enough to sit in a tool drawer - Connect by following the connection diagram - fit the adapter at the pump, hose or gun end and clip together Applications: - Connecting a pressure washer pump to a high pressure hose - Joining a hose to a pressure washer gun - Fitting quick release ends to M22 hose and lance setups - Swapping hoses quickly between machines that share M22 threads Options: Choose the colour you want from the list on the page. The colour choice does not change the connection sizes. Note: Check your fitting before ordering. The supplier states that a 14mm quick connect may leak on a 15mm fitting and a 15mm quick connect may leak on a 14mm fitting. Make sure the adapter matches your machine, and do not use it above its marked pressure.