Pressure Washer Hose Replacement 10m | 160 Bar | 1/4 Inch Bore

This 10m pressure washer hose replacement is a braided thermoplastic hose with a 1/4 inch (6.0mm) bore, rated for a maximum working pressure of 160 bar (2320psi). It is made for electric pressure washers with compatible connections and is sold in four end-fitting versions, so you can match the fittings on your own machine. Features and benefits: - 10m (32ft) length with a 6.0mm inner diameter - enough reach to move around a car or yard without repositioning the washer - 160 bar (2320psi) working pressure and 480 bar (6960psi) burst pressure - the burst figure is 3 times the working rating - Three-layer build: a joint-free inner tube, textile braid reinforcement and a smooth abrasion resistant PVC cover - built to cope with dragging and coiling - Non-marking cover with anti-slip and anti-friction properties - kinder to paintwork and patios - Zinc plated steel fittings with a longer ring nut - rust resistant and easier to grip and tighten - Usable up to 60°C (140°F) - suits the cold water duty of electric washers - Four fitting versions in the options, including an M22 extension hose - pick the one that matches your gun and machine Applications: - Replacing a worn or split hose on a light duty electric pressure washer - Car and van washing - Patio, drive and fence cleaning at home - Light commercial washing jobs In the box: The hose is supplied with an adapter for use as an extension on the fitting types the seller marks for that purpose. Check the option you choose against the fitting sizes in the pictures. Note: Check the fitting size at both ends of your existing hose before ordering, as pressure washer connectors vary between machines. Do not exceed the 160 bar working pressure or 60°C water temperature, and replace any hose that is cut, bulging or leaking.