Pressure Washer Hose Adapter | 3/8 Inch Quick Connector

This 3/8 inch quick connector adapter set joins a pressure washer hose to a gun, lance or other accessory with a quick connection, and the seller rates the stainless steel connect nipples for up to 5000 to 6000 PSI. The 3/8 inch quick connect fittings let you build or repair a 3/8 inch hose connection without changing the rest of your kit. The package is listed as 4 PCS, but the option photos show different fittings for each Type, so check the photo for the Type you choose. Features and benefits: - 3/8 inch quick connect size on both the hose side and the gun side - one thread size to match when you swap or repair a hose - Stainless steel connect nipples rated by the seller for up to 5000 to 6000 PSI - suited to high pressure washer hose runs - Female coupler in brass with a 14.7mm body diameter and 16.4mm thread section - compact enough for tight hose reels and gun inlets - Male stainless plug 14.7mm in body length with a 16.2mm thread section - the length and thread to check against your existing fittings - 15mm hex nut on the 3/8 male fitting - spanner flats for tightening the joint - Five Type options in the shop (Type 1 to Type 5) - pick the one that matches your hose or gun Applications: - Connecting a pressure washer hose to the pump outlet, gun or lance - Attaching a hose to hose reels, ball valves and telescoping wands - Fitting surface cleaners and regular spray guns to a 3/8 inch hose - Repairing or extending a pressure washer hose in a workshop or on site In the box: Listed as 4 PCS of 3/8 inch quick connect fittings. The exact mix of fittings per Type is not stated, so check the option photo for the Type you choose. Note: Check that your hose and gun both use 3/8 inch connectors before ordering, and compare the thread lengths and hex size shown here with your existing fittings. Stay within the pressure rating of the lowest rated part in your system, and depressurise the washer before changing any fitting.