Pressure Washer Hose Connector | M22*1.5 or M14*1.5 | 14mm and 15mm Hose

This pressure washer hose connector is a steel and nylon insert fitting set that joins a high pressure hose to a washer, gun or lance. It is sold for 14mm and 15mm hose sizes, with an M22*1.5 ring nut version and an M14*1.5 hex nut version. Features and benefits: - Insert fitting with ring nut: the hose slides over the barb end and the nut closes the joint, which makes a hose repair a bench job - M22*1.5 internal thread on the black ring nut: a size to match against your washer outlet or gun before ordering - M14*1.5 version with a hex nut: a second thread size for guns and lances that use it - 14mm metal sleeve with a 6.07mm barb end: sizes are published, so you can check them against your hose and fitting - Steel and nylon construction: metal where the load is, plastic where the thread seats - Described as having a tightly seamed interface that is easy to connect and disconnect - Five numbered options (30 to 34) are offered; compare the drawings with your thread and hose size Applications: - Repairing a split or damaged end on a pressure washer hose - Rebuilding a hose to fit a different washer, gun or lance - Car wash and vehicle cleaning kit maintenance - Workshop and cleaning contractor spares In the box: Per order: 1 x pressure washer hose connector set, loose, with no retail box. Note: Measure your hose bore and the thread on your washer or gun first. Check that your hose is rated for the working pressure of your machine, and that the machine's maximum pressure is not above the hose rating. Depressurise the washer before fitting or removing any connector.