Oil Transfer Pump | Aluminum Alloy Shell | 12V 24V DC 12L/Min Suction

This 12V/24V submersible pump moves diesel, water, and thin oils at 12 liters per minute. The 38mm aluminum body fits inside narrow drum openings. The battery clips clamp straight onto standard car or truck terminals for quick siphoning anywhere. Features and Benefits - 38mm outer diameter aluminum alloy body - Slips straight into standard fuel cans and narrow bung holes without snagging. - 12L/min flow rate on 12V or 24V DC - Empties a typical 20-liter fuel jug in under two minutes so you get back to work. - Built-in stainless steel base strainer - Stops grit and tank sludge from hitting the impeller or reaching your engine. - Alligator clips with inline toggle switch - Hooks directly to battery posts so you do not need dedicated wiring. Applications - Moving diesel fuel from shop barrels into tractors, skid steers, and field machinery. - Draining bilges, small holding tanks, and flooded footings when you have no wall outlet. - Pumping kerosene and light heating oils into torpedo heaters, generators, and off-grid gear. Key Tips for Best Results Submerge the unit fully into the fluid before connecting the power clips to your 12V or 24V DC battery supply. Anyone learning how to use oil extractor pump equipment should note that running submersible impellers dry causes rapid wear. Keep transfer hoses straight and free of sharp bends to maintain the steady 12 L/min flow rate. Always disconnect power before lifting the tool out of the drum or container. After pumping thicker fluids or dirty water, flush the unit through with clean liquid to prevent residue settling inside the aluminum alloy casing between jobs. What It Is This tool is a submersible oil transfer pump housed in a rigid aluminum alloy shell designed to resist workshop knocks. Operating on standard 12V or 24V DC low-voltage power, it delivers a consistent flow rate of up to 12 L/min. Unlike surface-mounted units that require priming, this submersible body drops straight into drums, reservoirs, or tanks. It handles diesel, engine oil, and clean water safely. The metal casing aids thermal dissipation during continuous fluid shifts, ensuring the internal motor runs cool while transferring fuels or draining sumps. Key Uses & Applications This unit suits fluid handling across plant, agricultural machinery, and commercial vehicles. It empties engine sumps, drains machinery tanks, and transfers diesel into plant equipment on site. The 12V or 24V DC connection allows direct hook-up to vehicle batteries after a long drive between jobs. It is also ideal for filling fuel tanks on auxiliary equipment. Trades often ask how do diesel heaters work; they require clean, air-free fuel delivered to an internal combustion chamber, making this pump useful for filling supply tanks. By contrast, knowing how do infrared heaters work shows they need no fuel transfer, relying purely on radiant electric or gas elements.