Cordless Oil Extractor Pump | Fits Makita 18V Battery | Engine Fluid Transfer

This cordless oil extractor pump runs on your existing Makita 18V battery, giving you portable suction without power cords or hand pumping. The 120W electric pump pulls warm motor oil directly through the dipstick tube. Routine fluid changes stay clean and fast without lifting the vehicle. Features and Benefits - Makita 18V slide-on battery mount: Works with BL1830, BL1840, and similar packs, so you do not need alligator clips or wall outlets. - Narrow dipstick extraction tube: Slides straight down the tube to draw warm oil right from the bottom of the pan. - Pure copper electric motor: Pushes up to 300 gallons per hour to empty warm crankcase oil into your container in minutes. - Barbed hose fittings with metal clamps: Keeps lines sealed tight during fluid transfer to stop air leaks and driveway spills. Applications - Routine maintenance on passenger cars, small trucks, and SUVs without crawling underneath or pulling drain plugs. - Inboard and outboard boat engines where cramped hulls block access to the bottom drain. - Fluid changes on lawn tractors, generators, and small farm equipment with hard-to-reach sump plugs. Key Tips for Best Results When learning how to use oil extractor pump units, warm the vehicle slightly first. Never extract stone-cold lubricant or boiling fluid straight after a long drive; lukewarm oil flows best. Insert the extraction tube down the dipstick guide until it touches the sump base, then lift it slightly so the inlet is not blocked against the pan. Ensure your 18V battery is fully locked into place before starting. Keep the pump level, run the fluid into a dedicated waste container, and allow the lines to clear completely before disconnecting to avoid drips over the engine bay. What It Is This tool is a handheld, battery-powered electric oil extractor pump designed for mess-free fluid maintenance. Running on an 18V DC power source, it fits Makita 18V batteries such as the BL1830 platform, making it a portable solution that eliminates manual hand priming or trailing mains extension leads across the workshop. Unlike workshop equipment setups where users ask how do diesel heaters work or how do infrared heaters work to manage ambient garage temperatures, this cordless fluid transfer unit focuses entirely on mobile draining, pulling motor oil directly through the dipstick tube quickly and cleanly. Key Uses & Applications - Sump draining on cars, vans, and light commercial vehicles without needing a vehicle lift. - Motor oil changes on plant machinery, site generators, and lawn mowers where drain plugs are obstructed. - Routine engine oil servicing in domestic driveways, mobile trade vans, and fleet depots. - Fast engine fluid transfer between drums, transport containers, and storage vessels. - Clean topside fluid removal on stationary workshop engines, marine inboards, and utility plant equipment.