Leeb Hardness Tester SKD-552 | 7 Scales HL HB HRC | 100 Group Memory

This portable digital Leeb hardness tester reads the hardness of metal workpieces and shows the result on 7 scales: HL, HB, HRB, HRC, HRA, HV and HS. The measuring range runs from 170 to 960 HLD, and the handheld unit pairs with a D type impact device on a cable, so it can be taken to the part rather than the part to the bench. Features and benefits: - 7 hardness scales (HL, HB, HRB, HRC, HRA, HV, HS) - read the same test in the scale your drawing or procedure asks for - Wide measuring ranges, for example 17 to 68.5 HRC, 19 to 651 HB and 80 to 976 HV - covers a broad spread of metals - 360° measuring direction - test at any angle, even upside down, which helps on fixed or awkward parts - Segment LCD with EL backlight - shows the reading, material setting and TIMES counter in one view - Stores up to 100 groups of data - keep a run of readings without writing each one down - USB port with PC software - move results to a computer; a software adjustment function is also built in - Compact plastic case - made for use in poor working conditions - About 100 hours of continuous running with the backlight off, on 2 AA batteries (not included) Applications: - Mould die cavities, bearings and other machined parts - Heavy workpieces and installed machinery or permanently assembled parts - Failure analysis of pressure vessels, steam generators and similar equipment - Sorting and identifying metal stock in a warehouse - Testing the surface of small hollow spaces In the box: - 1 x main unit - 1 x D type impact device with cable - 1 x cleaning brush (I) - 1 x small support ring - 1 x manual Note: No test blocks are included, so choose either option and buy standard test blocks separately. The D type probe suits metal thicker than 5mm; special materials need other probe types. The sensor cable is yellow or gray and is sent at random. Batteries are not included.