Laboratory Balance 100g/200g/300g | 0.001g Readability | Draft Shield

This laboratory balance weighs to a readability of 0.001g (1mg) and comes in 100g, 200g and 300g capacity versions, model codes YP1003Q, YP2003Q and YP3003Q. It has a backlit LCD, a 90mm diameter pan with a clear plastic draft shield, and a stabilisation time of 1.5 seconds, so it suits bench weighing where small masses matter. Features and benefits: - Readability of 0.001g with repeatability of ±0.002g: small samples, powders and additives can be weighed to the milligram - Three capacities, 100g, 200g or 300g: pick the range that matches your typical load - Backlit LCD display: figures stay easy to read in a dim lab or workshop - Clear plastic draft shield over the pan: cuts the effect of air movement on the reading - Four adjustable feet with a built-in bubble level: set the balance level on an uneven bench - Checking weighing and piece counting functions: quick pass or fail weighing and counting of small identical parts - Overload protection, full capacity subtraction and a below balance weighing facility: practical on a busy bench Applications: - Weighing samples and reagents in school and college laboratories - Batching small quantities for cosmetics and food preparation - Brewing and flavouring additions - Counting small identical parts such as screws, washers and beads in a workshop In the box: The balance is shown packed in foam inside a cardboard box, and the box contents picture shows printed instructions and an accessory set. A set of reference weights in a wooden case is shown in one picture; confirm exactly what is included before ordering. An RS232C interface and an under hook are listed as options. Note: Place the balance on a firm, level surface away from draughts and vibration, and level it with the feet and bubble level before use. Do not load it above its stated capacity.