Distance Sensor | 940nm Ranging Breakout | For Robotics & Arduino

You can get exact distance data for your project with this VL53L0X laser distance sensor. The small board uses Time-of-Flight to figure out range. It measures down to the millimeter. This is a complete module. It makes it simple to add object detection or ranging to your electronics. Features and Benefits - Measures range up to 2m - It gives steady readings. The target's color or texture does not affect them. - Small GY-VL53L0XV2 board - Its small size lets you put it in tight spots. This works for robotics or custom cases. - Simple I2C protocol - It talks over a standard two-wire connection. Many libraries show how to use the VL53L0X with Arduino. - Low current use - It uses very little power. This helps batteries last longer in mobile and portable devices. Applications - Autofocus help for custom camera builds. - Presence detection for smart lighting and automated systems. - Counting or positioning parts on a small assembly line. What It Is This is a Time-of-Flight (ToF) Laser Ranging Sensor, specifically the VL53L0X model. It is designed for robotics and Arduino projects. The sensor uses a 940 nm wavelength laser to measure distance. It communicates via an I2C interface. The device is supplied as an SMD package. This sensor works by emitting a laser pulse and measuring the time it takes for the light to return to the sensor, allowing for precise distance calculations. Key Uses & Applications This 940 nm ranging breakout sensor is suitable for various applications requiring precise distance measurement. Its primary uses are within robotics, where it can facilitate obstacle avoidance, navigation, and positioning. Arduino projects can integrate this sensor for similar ranging tasks. The ToF technology allows for accurate distance sensing, making it useful in scenarios where non-contact measurement is essential. How to Choose When selecting a laser distance sensor, consider the interface required for your project; this model uses I2C. The wavelength of 940 nm is a key specification for this sensor. For applications needing precise distance measurement, a Time-of-Flight (ToF) sensor like this VL53L0X model is a suitable choice. Ensure the package type, SMD in this instance, matches your assembly needs. Grit / Spec Guide This sensor operates using a 940 nm laser for ranging. It is a Time-of-Flight (ToF) type sensor, model VL53L0X. The interface is I2C, which is a common communication protocol for microcontrollers. It comes in an SMD package. To measure distance with this laser sensor, the ToF principle is employed, calculating range based on the time taken for the laser light to travel to a target and return. Care & Safety Handle the SMD package with care to prevent damage. When working with laser sensors, avoid direct eye exposure to the laser beam, although the 940 nm wavelength is in the infrared spectrum and generally considered safe for brief, incidental exposure. Ensure proper electrical connections for the I2C interface. Keep the sensor clean and free from dust or obstructions that could interfere with its ranging capabilities.