Syringe Hand Fuel Pump | Manual Suction Extractor | Automotive Oil Change

This manual fluid syringe pulls oil, coolant, and gear lube without spills. Two internal rubber rings keep a tight vacuum seal while you work. The clear plastic body holds up to 1500ml and shows exact volume marks, keeping your work area clean. Features and Benefits - Dual rubber piston seals - Maintain steady suction so fluid stays inside the chamber instead of dripping onto your hands - Clear cylinder with printed measurements - Lets you check fluid levels and see how much you pulled from the reservoir - Flexible extension hose - Fits deep into narrow dipstick tubes and small brake fluid reservoirs - Fully detachable body - Pulls apart in seconds so you can flush it clean with normal shop degreaser Applications - Siphoning old fluid out of master cylinders before you flush or bleed brake lines - Drawing dirty oil out of transmission fill holes and low-clearance gearboxes - Draining and refilling vehicle differentials or transfer cases during routine fluid changes What It Is This tool is a manual suction extractor designed in a syringe-style hand fuel pump format. It draws and dispenses automotive service fluids through physical piston operation, eliminating the need for compressed air or electrical connections. Built to handle engine oil, fuel, and other everyday automotive fluids, the unit relies on direct manual displacement to shift liquids cleanly. It gives workshops and mobile technicians precise control over fluid transfer, allowing measured extraction from reservoirs and sumps without spills, messy priming, or the risk of overfilling tight access points. Key Uses & Applications Tradespeople rely on this manual pump for targeted maintenance tasks where draining from underneath is impractical. It is suited to: - Extracting engine oil directly from dipstick tubes or small sumps - Removing fuel from tanks, lines, and filter bowls during servicing - Drawing off overfilled automotive fluids from master cylinders or reservoirs - Priming fuel systems and moving fluid between containers cleanly To use a siphon pump or manual syringe safely, insert the intake hose into the liquid, draw the plunger back smoothly to create suction, and direct the discharge line into an approved waste container. How to Choose Selection depends entirely on the volume of fluid you need to move and the space available. This pump is available in 100 ml, 200 ml, 500 ml, and 1500 ml capacities. Smaller 100 ml and 200 ml units suit tight spaces, brake fluid reservoirs, and fine fluid adjustments. The 500 ml and 1500 ml options work best for larger engine oil changes or when you need to siphon gas with a hand pump efficiently. Always confirm that your workshop uses dedicated extractors for separate fluids to prevent cross-contamination between fuels and lubricating oils.