Transfer Pump | Heavy-Duty Aluminum Shell | Portable 12V 24V Submersible

This submersible pump empties fluid tanks, barrels, and vehicle fuel cells without hand siphoning. Connect the alligator clips directly to a 24-volt battery to start moving liquid. At 38mm wide, the metal body fits into narrow drum openings to pump out diesel, kerosene, or standing water. Features and Benefits - Stainless steel and aluminum casing - Resists rust from fuel contact and shields the motor from knocks inside the tank. - Intake screen at the base - Sits on the bottom of the reservoir and stops grit from reaching the impeller. - 24V motor with battery clips - Runs off truck or tractor batteries when you do not have plug-in power. - Handles diesel, kerosene, and water - Empties drums or drains boat bilges without switching to different tools. Applications - Pumping fuel into tractors, diggers, and generators from 55-gallon drums out in the field. - Clearing water out of boat bilges, shallow pits, or wet footings with no mains power nearby. - Moving kerosene and light heating oil across barrels in farm sheds or workshops. Key Compatibility Differences A diesel transfer pump is engineered specifically for heavier, lubricating liquids. People often ask: can you use a diesel transfer pump for gasoline? The answer is strictly no. Why are fuel transfer pump not suitable gasoline? Petrol has a dangerously low flashpoint compared to diesel. Running volatile petrol through a standard DC submersible motor creates an immediate explosion hazard from internal brush arcing or static build-up. This unit is built strictly for diesel, compatible oils, and water. Operating in ambient heat up to 43°C or cool site mornings around 45°F poses no issue for diesel, but petrol vapours become lethally volatile under the exact same workshop conditions. What It Is So, what is a diesel transfer pump? It is a dedicated fluid-handling tool designed to lift and move non-volatile fuels and water between bulk storage and equipment tanks. This model is an electric, portable submersible unit encased in a heavy-duty aluminium alloy and stainless steel shell. Powered by a direct-current supply, it operates on standard 12V or 24V site vehicle electrics, plant batteries, or auxiliary battery packs. The sealed metal housing protects internal components from corrosion and fluid ingress while submersed, giving mobile mechanics and plant operators a compact, self-contained method to empty drums, drain sumps, and top up machinery on site without manual siphoning. Key Uses & Applications This unit suits daily utility tasks across plant hire, agriculture, and mobile site repairs: - Refuelling excavators, tractors, generators, and site dumpers directly from 205-litre barrels or intermediate bulk containers. - Draining off-spec diesel, light machine oils, or lubricating fluids from holding tanks during equipment servicing. - Removing standing water from footings, shallow bunds, and machinery engine bays. - Transferring fluids between remote supply bowsers and field equipment without mains power. Always ensure the fluid level fully covers the inlet during pumping to prevent dry running, and inspect the aluminium shell and power leads for site contamination before dropping it into your fuel supply.