Shore A Durometer Hardness Tester | 0-100HA Dial | Rubber and Elastomers

This Shore A durometer hardness tester reads the hardness of soft rubber and other elastomers on a 0 to 100HA dial scale. It has a 2.5mm needle length and a flat cone point of 0.79mm diameter, and comes in a red plastic case marked with the letter A. Features and Benefits - 0 to 100HA dial scale - read Shore A hardness straight from the gauge face - Type A gauge with a 2.5mm needle length and a 0.79mm diameter flat cone point - made for soft rubber, synthetic rubber, printer rollers and similar elastomers - Marked as a tire durometer, Type A - used on soft rubber, multiple fat, leather and wax - Dial measures 7.6cm across, with 5.3cm from the dial centre to the indenter end - Red plastic case marked A - Simple repeat testing - take 3 readings and use the average as the result Applications - Soft rubber and synthetic rubber hardness checks - Printer roller and other elastomer material - Leather and wax samples - Tyre rubber, as the gauge is marked as a tire durometer In the box - 1 x tire durometer (Shore A) Note: The sample thickness should be over 6mm, with no more than 3 layers stacked. Take 3 readings and use the average as the test result. The listing asks you to allow 1 to 3mm error due to manual measurement.