Dry Bath Incubator M-JSY-H | RT+5 to 100°C | Digital Control | Block Modules

This mini dry bath incubator holds sample tubes in a replaceable anodised aluminium block and heats them to a set temperature from RT+5 to 100°C, with a 1 minute to 99 hour 59 minute timer. It is sold in three versions: M-JSY-H (heating only), M-JSY-HF (heating with fast fan cooling) and M-JSY-HL (heating and semiconductor cooling, 10 to 100°C), each with a dual-row LCD and touch membrane buttons. Features and benefits: - Temperature accuracy of ≤±0.3°C, fluctuation and block uniformity of ≤±0.5°C and display accuracy of ±0.1°C - steady conditions across every tube in the block - Real-time temperature and countdown timer shown together on a dual-row LCD - check progress at a glance - Multi-point programming of up to 5 temperature and time sets - run multi-step protocols without resetting by hand - Temperature deviation correction - adjust the reading to match a reference thermometer - Replaceable aluminium heating blocks - swap modules to suit the tube size and clean them after use - Startup self-check, over-temperature protection and fault alarm - built-in safeguards during unattended runs - Transparent insulation cover and ventilated ABS housing - limits heat loss and lets you see the tubes while they run Applications: - Denaturing nucleic acid and protein samples - Holding enzymes and running timed tube reactions - Warming PCR samples before a run or before electrophoresis - Serum clotting tests and general sample warming or holding - Milk testing with the 32 x 0.2ml block In the box: Per unit: 1 x dry bath main unit and 1 module block. The block fitted depends on the option you pick. Note: The power supply has an EU type plug; use a UK adapter. Allow the block to cool before removing tubes or swapping modules. Keep the unit dry and use it for laboratory, workshop, school, food and brewing tasks.