Digital Shore Durometer Shore A | 0 to 100HA | 0.5HA Resolution

This digital Shore A durometer is a pocket-size hardness meter that reads the hardness of soft and medium materials on an LCD, across a range of 0 to 100HA with 0.5HA resolution. It uses a 35 degree pressure needle cone, runs from a 1.5V button battery that is included, and comes in a plastic case, so it can be kept in a drawer or toolbox and used at the bench or on the shop floor. Features and benefits: - 0 to 100HA range with 0.5HA resolution - fine enough to tell close grades of rubber or plastic apart - Clear LCD readout - the figure is easy to read without interpreting a dial - H key holds the reading - lift the gauge off the sample and note the value at your own pace - ZERO key resets the readout - start each check from a clean zero - Accuracy no more than ±1% - stated by the seller for routine comparison work - Compact pocket size with plastic storage box - protects the indenter between jobs - 1.5V button battery included - ready to use once the instrument is unpacked Applications: - Checking the hardness of rubber seals, gaskets and sheet - Comparing plastic and leather samples in workshops and schools - Testing the firmness of wax and multigrease - Incoming material checks for items of medium hardness In the box: 1 x digital Shore A durometer and 1 x user manual, supplied in a plastic case with a foam insert. Note: Manual measurement can vary, so allow an error of 1 to 3mm in how the sample is placed and pressed. Total measuring force is 8.1N, so keep fingers clear of the indenter tip when pressing it onto a sample.