50kg Load Cell Kit | Includes HX711 Module & Bracket | For Arduino Scales

This kit has a 50kg load cell, an HX711 amplifier, and a mounting bracket. It's a good way to start an Arduino load cell project. It gives you the main parts to turn physical force into a clean digital signal. Your microcontroller can then read this signal. Features and Benefits - Complete sensor set - You get a 50kg weighing sensor, HX711 AD module, and bracket in one package. - HX711 amplifier included - This board reads the small signal from the strain gauge. It then turns it into a steady digital output. - Combine for higher capacity - Use four of these kits. You can make a full-bridge scale with a 200kg capacity. This is good for a human body scale. - Includes mounting bracket - The bracket makes installation easier. It helps place the sensor correctly for accurate readings. Applications - Building one section of a DIY digital bathroom scale (you need four kits for a full scale). - Making a smart pet feeder that can give out food by weight. - Testing weight-based sorting machines or inventory counters. What It Is This is a 50kg Load Cell Kit, designed for building scales and other weight-sensing applications. It includes a metal load cell, an HX711 AD Module, and a mounting bracket. A load cell is a transducer that converts force into an electrical signal. Specifically, this kit uses a half-bridge strain gauge sensor, which changes its electrical resistance when deformed under load. This change is then measured by the HX711 module to determine the applied weight. Key Uses & Applications This 50kg Load Cell Kit is ideal for projects requiring precise weight measurement up to 50 kilograms. Its compatibility with Arduino makes it suitable for custom-built scales, such as kitchen scales, postal scales, or laboratory balances. The kit can also be used in industrial settings for monitoring loads on conveyor belts or in small hoppers. Hobbyists and educators can use it for experimental setups involving force measurement. How to Choose When selecting a load cell kit, consider the maximum weight you need to measure; this kit handles up to 50 kg. Ensure compatibility with your existing electronics; this kit is designed for Arduino systems. The included HX711 AD Module is crucial for converting the small electrical changes from the half-bridge strain gauge into a usable digital signal. The material, which is metal for this product, affects durability and environmental resistance. Grit / Spec Guide The key specifications for this 50kg Load Cell Kit are its 50 kg load capacity and its metal construction. It features a half-bridge strain gauge sensor. The included HX711 AD Module is essential for interfacing the load cell with microcontrollers like Arduino, typically operating with a 5V power supply. The mounting bracket facilitates secure installation. Understanding how a load cell works, by measuring strain, is important for accurate calibration. Care & Safety Handle the load cell with care to avoid damage to the internal strain gauge. Do not exceed the 50 kg load capacity, as this can permanently affect its accuracy. Ensure all electrical connections, particularly to the HX711 module, are correct to prevent short circuits. Protect the metal load cell and the cable from moisture and extreme temperatures. Always disconnect power before making or changing any electrical connections.