Magnetic Stirrer Hot Plate | 0-2600RPM | 280°C | 2000ml Working Capacity

This magnetic stirrer hot plate heats and stirs in one unit, with a 2000ml working capacity, a stirring speed of 0 to 2600RPM and a heating range from room temperature to 280°C. It comes as model XLD-78-1 or XLD-78-1S, both with a 120 x 120mm aluminium work disc, separate speed and temperature controls and a metal-tipped temperature probe. Features and benefits: - 2000ml working capacity - enough for large beakers and conical flasks on a single hot plate - 0 to 2600RPM speed range with a dedicated speed knob - turn it clockwise to raise the stirring speed - Heating from room temperature to 280°C with 180W/250W thermal output - a wide span for warming and heating solutions - Overheat protection at 300°C - a built-in limit above the working range - 6061 aluminium work table with frosted oxidation finish - a flat 120 x 120mm surface for the vessel - Separate POWER and TEMP switches - run stirring alone or switch the heater on when needed - Rubber cushioned feet, labelled by the supplier as shock absorbing with high suction - help keep the unit steady on the bench - Temperature probe included - a metal-tipped sensor on a cable Applications: - Mixing and warming solutions in laboratory and school science work - Preparing samples and mixtures in food and cosmetics workshops - Research and education benches that need heating and stirring together - Petroleum analysis and general laboratory preparation tasks In the box: The unit and a temperature probe are included. No beaker, flask or stir bar is supplied, so bring your own vessel and magnetic stir bar. Note: The work disc gets very hot, and the unit carries a high temperature warning label, so do not touch it. Place the beaker in the centre of the disc on a flat bench, use a mains socket that matches the voltage marked on the machine, and unplug it when idle. The plug is EU type, so use a UK adapter.