Air Compressor Safety Relief Valve 1/4 Inch NPT | 125 to 270PSI | Brass

This brass air compressor safety relief valve has a 1/4 inch male NPT thread and opens to release air when line pressure reaches its set value. It is sold in six pressure settings from 125PSI to 270PSI, so you can match it to the working pressure of a compressor tank or air line. Features and benefits: - Six pressure settings: 125PSI, 135PSI, 175PSI, 200PSI, 250PSI and 270PSI, listed as 0.85MPa, 1MPa, 1.2MPa, 1.4MPa, 1.5MPa and 1.7MPa by the seller - Brass housing and fittings with a stainless steel spring, for a compact valve that suits air service - 1/4 inch male NPT inlet with a red sealing element already on the thread - Pull pin with a metal split ring, so the valve can be opened by hand to vent the tank - Straight-through, single flow design that exhausts air only - Small body, 4cm long and 1.3cm wide, which fits tight spots on tanks and manifolds Applications: - Overpressure protection on air compressor tanks and receivers - Replacing a worn or seized relief valve on a workshop compressor - Pressure relief on air lines, pumps and pneumatic equipment - Spares stock for maintenance and machinery repair In the box: 1 x air compressor safety relief valve in the chosen pressure setting. Note: Always pick a valve rated at or just above the working pressure of the tank and below its maximum rating. Use it with air only, check the thread type before fitting, and test the pull pin regularly so the valve does not stick. The seller states appearance may vary slightly in size or colour.