Air Compressor Drain Valve | 1/4 BSP Brass Drain Cock | T-Handle

This brass air compressor drain valve is a manual drain cock with a T-handle, made for a 1/4 BSP thread. Fitted at the bottom of a compressor tank, it lets you open the valve by hand to blow down water and condensate, then close it again. Features and benefits: - Brass body - a solid metal drain cock for compressor tank use - 1/4 BSP thread - suits tank outlets tapped to this size - T-handle - gives a good hand grip to open and close the valve - Manual operation - no power, timer or air line needed to work it - Simple valve body only - one piece to fit, with no extra parts to assemble - Listed for room temperature working - intended for ordinary workshop conditions Applications: - Draining condensate from a compressor air receiver tank - Replacing a worn or seized drain plug or tap on a workshop compressor - Blowdown point on small air tanks with a 1/4 BSP port - Spares kit item for maintenance engineers and garage workshops In the box: 1 x brass 1/4 drain valve (valve body only). Note: Release the tank pressure and switch the compressor off before removing or fitting any drain valve. Check your tank outlet thread is 1/4 BSP before ordering. Real colour may differ slightly from the pictures, and sizes can vary a little as they are measured by hand.