Air Compressor Check Valve | Brass 3-Port | 6mm Bore | Male Thread

This brass air compressor check valve is a 3-port fitting that lets air flow from the pump into the tank and stops it flowing back, with a 6mm internal diameter and male threaded ports on the pump, tank and tube sides. It is sold as a replacement for an old or broken check valve on a piston air compressor, in a gold-coloured brass body. Features and benefits: - Brass body - a solid metal fitting for the pressure side of a compressor - 3 male threaded connections - one for the tube, one for the air pressure tank and one for the compressor piston pump - Male thread diameters of 20, 16 and 10mm - check these against your old valve before ordering - 6mm internal diameter - the bore through the valve body - Threaded ends - screw straight into place without special fixing - Supplied with a lock cylinder screw, a brass compression ferrule (olive) and a brass adapter fitting with a hex nut end - Hexagonal cap on top - gives a spanner flat for fitting and servicing Applications: - Replacing a worn or leaking check valve on a piston air compressor - Rebuilding the pump to tank connection on a workshop compressor - Repair and maintenance of direct-drive air compressors - Spares stock for maintenance engineers and garages In the box: 1 x brass check valve body with lock cylinder screw, 1 x brass compression ferrule (olive) and 1 x brass adapter fitting with hex nut end. Quantity is 1 piece. Note: Measure the thread sizes on your old valve before ordering, as the listed sizes are 20 x 16 x 10mm with a small manual measurement tolerance. Release all air pressure from the tank before removing or fitting any valve, and use thread sealant suitable for compressed air. Colour may vary slightly from the photos.