Pressure Washer Replacement Parts | Pump Seal Kit | 190595GS, 190711GS

These pressure washer replacement parts come as a pump seal kit: replacement seals, O-rings and fixings for the pump head of a high pressure washer, listed for models 190595GS and 190711GS. It gives you the rubber, copper and plastic parts needed to strip a worn pump and rebuild it, including a check valve kit for the pressure-generating valves inside the pump head. Features and benefits: - Package contents listed as 6 seals, 10 O-rings, 3 pilot spacers, 3 washers and 5 screws, so a pump rebuild does not start with a parts hunt - Listed for models 190595GS and 190711GS - the seller also names 1439-, 1450-2 and 1542- series machines, so check your pump before ordering - Check valve kit included - the valves that build pressure inside the pump head are covered by the set - Mixed materials - parts are listed as copper, rubber and plastic, with steel noted in the seller text, built to resist rust and wear - Brass slotted bushings - the photos show three brass pump bushings with a slotted design - Five socket head cap screws - knurled hex socket heads for tightening with an Allen key - Replaces old or damaged seals - a low-cost repair for leaking or weak pumps instead of buying a whole new unit Applications: - Rebuilding the pump on a leaking or low pressure power washer - Workshop and maintenance servicing of pressure cleaner pumps - Keeping a spare seal set to hand for repeat repairs - Replacing worn O-rings and cup seals during routine pump servicing In the box: - 6 x seals - 10 x O-rings - 3 x pilot spacers - 3 x washers - 5 x screws Note: Isolate the machine from power and relieve all water pressure before opening the pump. Compare the old seals and bushings with the parts in the photos, as the listing gives size as per picture only. Colours and measurements may differ slightly from the images.