Parts for Pressure Washers O-Ring Kit | 20 Pieces | 9.2mm ID | M22 and 1/4"

This O-ring seal kit is one of the simplest parts for pressure washers to keep in stock: 20 rubber O-rings sized 9.2mm inner diameter by 14mm outer diameter, made for 1/4" and M22 fittings on pressure washer hoses and quick disconnect couplings. Fitting a fresh ring at a worn joint helps stop the weeping and drips that appear when an old seal has flattened or cracked. Features and benefits: - 20 rings in one kit - enough spares to refit several hose joints and keep a few in the van or workshop drawer - 9.2mm inner and 14mm outer diameter - a fixed, published size you can check against the old seal before ordering - Made for 1/4" and M22 fittings - the sizes used on many pressure washer hose and quick connect joints - Rubber construction, described by the seller as leak proof and durable - the soft material seals against the mating face when the coupling is tightened - Easy to fit and replace - slip the old ring out, seat the new one in the groove and reconnect - Small flat pack - stores easily in a toolbox or parts tray Applications: - Replacing worn seals in pressure washer hose quick disconnect couplings - Servicing M22 and 1/4" connectors on pressure washer hoses and guns - Garden hose connectors and faucet fittings - Keeping spare seals on hand for cleaning contractors and maintenance teams In the box: - 20 x O-ring seals Note: Measure your old ring or the groove before ordering, as only the 9.2mm inner and 14mm outer size is supplied. Depressurise the machine and disconnect the hose before removing a seal, and check the new ring sits flat in its groove before tightening.