Pressure Washer Replacement Parts | O-Ring Seal Kit | K2 K3 K4 K5

This O-ring seal kit is a set of pressure washer replacement parts: NBR rubber rings for the trigger gun, spray lance, high pressure hose ends and accessories such as brushes on K2, K3, K4 and K5 electric pressure washers. The set is made of NBR rubber that resists corrosion and oil and works at temperatures from -20 to 70 degrees Celsius, and the red rings are marked for a maximum of 160 Bar. Features and benefits: - NBR rubber rings - resist corrosion and oil, so they hold up around cleaning chemicals and greasy deposits - Working temperature from -20 to 70 degrees Celsius - the red rings are marked Max 60°C, so keep hot water away from them - Red rings marked Max 160 Bar - suited to the pressures these electric machines run at - Fits K2, K3, K4 and K5 machines - one set covers the common seal points on the lance, gun and hose - Rings for the Clik, Clip and M22 hose ends - 4 rings for each end type, so both ends of a hose can be resealed - 4 O-rings with 4 caps for the lance and brush - covers the brush and lance joints - Replaces worn rings at connections - helps stop drips and leaks at the joint Applications: - Resealing trigger guns and spray lances on K2 to K5 pressure washers - Fixing weeping joints on high pressure hose ends - Sealing brush and watering can accessory joints - Keeping a spare set in the van or workshop for call-outs In the box: Per set: 4 O-rings and 4 caps for the lance and brush, 4 O-rings for the Clik hose end, 4 O-rings for the M22 hose end and 4 O-rings for the Clip hose end. Note: Isolate the machine from power and water and release the pressure before removing any fitting. Fit the rings clean and lightly lubricated, and do not use the red rings above their marked 60°C and 160 Bar.