Air Compressor Unloader Valve | Power Off Solenoid Vent | 220V Coil

This power-off solenoid vent valve works as an air compressor unloader valve: a square cast aluminium valve body with a brass plunger tube and black knob, driven by a 220V coil, that vents trapped pressure when the power is cut. It is sold as the valve body alone, as a coil with indicator light and no wire, or as a coil with light and a wire of approx. 36cm, so you can choose the part you need to replace. Features and benefits: - Power-off vent: releases excess pressure when the coil loses power, which helps protect the compressor from starting against a loaded head. - Square valve body in cast aluminium with a silver finish, a brass plunger tube and a black plastic knob. - Threaded connection port on one side of the body for fitting into the compressor air line. - 220V coil rated AC220V 5.5VA at 100% ED and IP65, with an indicator light so you can see when it is energised. - Supplier describes it as mute and oil-free in design, for quiet running and clean air output. - Three variants: valve body only, coil with light and no wire, or coil with light and wire (wire length approx. 36cm), so a failed part can be replaced on its own. Applications: - Replacing a worn or failed unloader valve on an oil-free air compressor - Replacing a burnt-out 220V solenoid coil on a power-off vent valve - Workshop, school and maintenance compressor repair - Spares stock for small pneumatic systems In the box: One item per order, depending on the option chosen: 1 x square valve body, or 1 x coil with light and no wire, or 1 x coil with light and wire. Note: Mains voltage item. Isolate the compressor and release all air pressure before removing or fitting the valve or coil, and have the wiring done by a competent person. Check the coil label and port thread against your compressor before ordering. Colour and size may differ slightly from the pictures.