Pressure Washer Trigger Gun | M22 Hose, G1/4 Lance | 280Bar 4000psi

This high pressure trigger gun is a spray gun for pressure washers, rated up to 280bar (4000psi) with a maximum flow of 25l/m and a maximum temperature of 150°. It has an M22x1.5 male thread on the hose side and a G1/4 female thread on the lance side, with brass fittings and a red body with a black rubber grip and trigger. Features and benefits: - Rated up to 280bar (4000psi) - covers the pressure of most trade electric pressure washers - Maximum flow 25l/m and maximum temperature 150° - suits hot and cold water cleaning - M22x1.5 male hose thread with 14mm ID connector - fits hoses and machines that use an M22 outlet - G1/4 female thread for the lance - takes lances and nozzle holders with a matching thread - Brass quick release connector - nozzles and adapters are swapped without tools - Brass and engineering plastic construction - brass fittings at the inlet and outlet, plastic body - Black rubber grip and black trigger - a firm hold during long cleaning runs - Rotary nozzle options with 0°, 15°, 25°, 40° and 65° settings - a concentrated 0° jet through to a wide 65° spray Applications: - Cleaning vehicles, plant and workshop floors - Washing patios, drives, walls and fences - Replacing a worn or leaking trigger gun on a pressure washer - Contract cleaning with electric pressure washers In the box: The pack depends on the option chosen. Option A is a gun with one adapter and option B is a gun with an adapter and rotary nozzle. Check the option picture before ordering. Note: Never exceed the 280bar (4000psi) rating, the 25l/m flow or the 150° temperature limit, and never point the jet at people or animals. Check that the thread on your hose and lance matches M22x1.5 and G1/4 before fitting. Measurements were taken by hand, so small differences may occur.