5-Inch Orbital Sander Pad | For DeWalt DWE6421/6423 | 8-Hole Hook & Loop

This 5-inch orbital sander pad replaces the original part on DeWalt sanders, specifically models DWE6421 and DWE6423. It has an 8-hole pattern to pull away dust and a hook-and-loop surface for quick disc changes. The pad measures 125mm across. Features and Benefits - Hook-and-loop fastening - Lets you change sandpaper quickly, so you spend less time setting up. - 8-hole dust collection pattern - Lines up with your sander's holes to remove dust from your work. - Strong grip surface - The hook material holds sanding discs firmly, keeping them from coming loose. - Aluminum oxide abrasive - These discs cut evenly and last longer, especially on wood and painted items. Applications - Coarse grits (40-80) - Use these for stripping old paint or varnish and for removing a lot of material. - Medium grits (100-150) - Good for smoothing surfaces after stripping and for general sanding. - Fine grits (180-400) - Prepares wood for a final coat of stain or paint, leaving a very smooth feel. What It Is This is a 5-inch orbital sander pad designed for use with specific DeWalt random orbital sanders. It is a replacement part for the sanding surface of your tool, providing the hook and loop attachment for abrasive discs. The pad is made from plastic and features an 8-hole configuration for dust extraction. Its primary function is to securely hold sanding discs during operation, allowing for effective material removal and finishing. Key Uses & Applications This 5-inch orbital sander pad is for use with DeWalt DWE6421, DWE6421K, and DWE6423 orbit sanders. A random orbital sander is used for a wide range of sanding tasks, from aggressive material removal to fine finishing. The random orbital action helps to minimise swirl marks, making it suitable for preparing surfaces for painting, varnishing, or staining. Common applications include sanding wood, plastics, and composites in workshops and on site. How to Choose When selecting a sander pad, ensure it matches your specific sander model and diameter. This pad is a 125 mm diameter, 8-hole, hook and loop type, compatible with DeWalt DWE6421, DWE6421K, and DWE6423. Consider the pad's material for durability and its hole pattern for efficient dust extraction, which is crucial for a cleaner workspace and better finish. Always verify compatibility to ensure proper fitment and safe operation. Grit / Spec Guide This sander pad itself does not have a grit rating; grit applies to the abrasive discs attached to it. However, the pad's 8-hole configuration is designed for optimal dust extraction with compatible sanding discs. For rough sanding and rapid material removal, use discs with lower grit numbers, such as 80 grit. For finer finishes and preparing surfaces for painting, use higher grit numbers like 150 grit. Always match the disc's hole pattern to the pad for effective dust management. Care & Safety Ensure the sander pad is free from debris before attaching sanding discs. Regularly inspect the hook and loop surface for wear; a worn surface will not hold discs securely, leading to poor sanding performance and potential disc detachment. When using a random orbital sander, always wear appropriate personal protective equipment, including eye protection and a dust mask. Ensure the workpiece is securely clamped and allow the sander to reach full speed before making contact with the surface.