Laboratory Water Bath HWB-1 to HWB-6 | RT to 99.9°C | Digital PID

This laboratory water bath is a digital thermostatic bath with a stainless steel tank and PID temperature control from room temperature to 99.9°C. It comes in 1, 2, 4 and 6 hole sizes, from 400W to 1000W, and suits warming, drying, concentrating and distillation work on the bench. Features and benefits: - PID control with 0.1°C resolution: the set temperature is held steady, with a measurement error of ±0.2%FS or ±0.5%FS - Dual LED display: temperature and heating time are both shown on the red control panel, and the timer can be set from 0 to 999 minutes - 304 stainless steel inner liner with a moulded, weld-free tank: no seam for scale or residue to collect in - Built-in stainless steel heating tube with 360° cycle heating - PP ring lids: the ring cap adjusts to different sizes of flask and beaker - Plug-out drain pipe and a power switch: emptying and shutting down are straightforward - P models add dry-burn protection, timed heating and an overtemperature alarm; the standard models do not have the dry-burn function Applications: - Warming and incubating samples in laboratory and school science work - Distillation, drying and concentrating - Holding flasks and beakers at a steady temperature in workshops, food, cosmetics and brewing tests Note: Keep the water level high enough and never let the heating element run in air. Prevent hot water splashing, and keep the bath dry around the controls. Clean after use to avoid scale and residue. Use a thermometer to check the temperature when accuracy matters. Choose the plug type for your mains supply; the UK shop plug options are listed in the options.