Door Taper Bushing | Secure Machined Fit | For NA NB NC ND 1990-2021

Name: Door Taper Bushing | Secure Machined Fit | For NA NB NC ND 1990-2021
Brand: Compel Group
SKU: TAPE-00002
Price: 71.99 GBP
Availability: InStock
Rating: 4.2 (22 reviews)

Stock Nr:

SKU:

1 / 6

£71.99inc VAT

Color2pcs

Quantity

Secure checkout
All major cards
Tracked delivery

Door Taper Bushing | Secure Machined Fit | For NA NB NC ND 1990-2021

£71.99

Fast Shipping

Secure Payment

Easy Returns

Good to know

Questions about this product

Will these bushings fit my 2008 NC Mazda MX-5?: Yes, they will. These door bushings are designed to fit all generations of the Mazda MX-5 from 1990 to 2021, which includes the NA, NB, NC, and ND models.
My doors rattle a bit over bumps. Will these actually help with that?: Yes, that's exactly what they are designed to fix. They replace the soft factory bushings with a solid 16mm machined POM block, which stops the door moving in the frame and reduces rattles and shakes.
How do I install these door bushings? Is it a difficult job?: Installation is very straightforward and usually takes just a few minutes. You just need to undo the two bolts holding the original cup on the door jamb, swap it for the new bushing, and tighten the bolts back up.

Taper Bushings spec sheet (PDF)

Get a one-page sheet with full description, specifications, technical details, FAQs, price & SKU - handy to save, print, or share.

Not sure which one?

Compare with similar products

Nothing close enough to compare right now

We only put products side by side when they are genuinely the same kind of thing, in stock and in a similar price range. For this one there is no true match at the moment, so we would rather show you nothing than the wrong thing.

Browse all taper bushings

Explore the range

Popular in Industrial & Machinery

Browse Industrial & Machinery

TUYA WiFi/ZigBee MCB Smart Circuit Breaker Over Current Under Voltage Protection Power Metering 1-63A Remote Control Switch

4.9

£83.99

Push-to-Connect Air & Water Fittings | 4mm-12mm OD | Quick-Release Hose Couplings

4.9

£21.99

Radiator Cleaning Brush | Flexible Long Thin Duster | Dryer Duct Cleaner

4.9(688)

£49.99

Fitting | 304 Stainless Steel Compression | 1/2 NPT Union

4.9(49)

£21.99

Complete the set

Accessories & add-ons

Sensor Protection Sleeve | Stainless Steel Blind Tube | 6mm

5.0(11)

£38.99

Motion Sensor Bracket | Automatic IR Lamp Holder | 110-240V AC

4.8(196)

£45.99

Soil Moisture NPK Sensor | 7-in-1 Agricultural Probe Accessory

4.8(25)

£65.99

Arduino Raspberry Pi Sensor Kit (45pc) | Modules for UNO R3 MEGA2560

4.7(58)

£72.99

Reflector Plate | Photoelectric Sensor Accessory | TD Series

4.7(23)

£39.99

Load Cell ADC Module | 24-Bit HX711 Sensor Accessory

4.4(21)

£20.99

Bending Strain Gauge Amplifier Module | Sensor Accessories UK

£27.99

These Miata door bushings replace the soft, factory rubber parts on all 1990-2021 Mazda MX-5 models. The solid, machined taper bushing connects the door and the chassis firmly. This helps stop door rattle and makes the car's body stiffer. Features and Benefits - High-density polymer material - Much stiffer than the original rubber. It stops the door from shaking on rough roads. - Reduces door movement and noise - Makes a tighter fit. This gets rid of common squeaks and rattles, making the cabin quieter. - Improves chassis feel - The bushings act as a chassis stiffener. They help the doors add to the car's overall strength for a more connected feel. - Direct-fit installation - Made to fit NA, NB, NC, and ND generation Miatas. They install in minutes using the factory bolts. Applications - Daily Driving Improvement - Get a quieter, more solid-feeling ride. It gets rid of annoying door vibrations and looseness. - Performance Driving - You'll notice a more responsive chassis during spirited driving or on the track. Body flex is reduced. - Vehicle Restoration - A simple upgrade to make an older Miata feel tighter. It will feel more like it did when new.

Material: Machined Aluminum. Compatibility: Mazda MX-5 Miata NA NB NC ND (1990-2021). Bushing Thickness: 16mm. Function: Prevents door shaking. Type: Door Bushing. Bushings Thickness: 16 mm. Weight (per bushing): Approximately 50-100 grams. Material: Machined Aluminum Alloy (or similar high-strength metal). Compatibility: Mazda MX-5 Miata NA, NB, NC, ND. Chemical Concern: None. Color: Typically Silver or Black Anodized. Durability: High (resistant to wear and corrosion). Function: Secure Door, Prevent Shaking, Improve Chassis Rigidity. Installation Location: Door Hinge / Latch Area. Installation Type: Direct Replacement / Bolt-on. Interior Accessory: Yes. Model Years: 1990-2021. Product Type: Door Bushings. Quantity: 2 pieces. Tolerance: Precision Machined for Tight Fit. Q: What are these door bushings made of? A: They are machined from a solid piece of Delrin. It's an industrial polymer known for being very stiff and having low friction, so it won't wear out like the original rubber parts.. Q: What are these door bushings made of? A: They are machined from a solid piece of Delrin. It's an industrial polymer known for being very stiff and having low friction, so it won't wear out like the original rubber parts.. Q: What are these door bushings made of? A: They are machined from a solid piece of Delrin. It's an industrial polymer known for being very stiff and having low friction, so it won't wear out like the original rubber parts.. Q: How are these an improvement over the stock Miata bushings? A: The original bushings are soft rubber that compresses and degrades, which causes door rattle and chassis flex. These solid Delrin bushings provide a tight, precise fit that stops the door from shaking and makes the whole car feel more connected.. Q: How are these an improvement over the stock Miata bushings? A: The original bushings are soft rubber that compresses and degrades, which causes door rattle and chassis flex. These solid Delrin bushings provide a tight, precise fit that stops the door from shaking and makes the whole car feel more connected.. Q: How are these an improvement over the stock Miata bushings? A: The original bushings are soft rubber that compresses and degrades, which causes door rattle and chassis flex. These solid Delrin bushings provide a tight, precise fit that stops the door from shaking and makes the whole car feel more connected.. Q: Will these fit my 1991 'NA' Miata and my friend's 2020 'ND' Miata? A: Yes, they will. They are designed with dimensions that fit every generation of the Mazda MX-5 Miata, from the first 1990 model all the way up to 2021 cars.. Q: Will these fit my 1991 'NA' Miata and my friend's 2020 'ND' Miata? A: Yes, they will. They are designed with dimensions that fit every generation of the Mazda MX-5 Miata, from the first 1990 model all the way up to 2021 cars.. Q: Will these fit my 1991 'NA' Miata and my friend's 2020 'ND' Miata? A: Yes, they will. They are designed with dimensions that fit every generation of the Mazda MX-5 Miata, from the first 1990 model all the way up to 2021 cars.. Q: Is it difficult to install these on the car? A: No, it's a very simple job that takes about five minutes per door. You just need a wrench to remove the single bolt holding the factory bushing, swap this one in its place, and tighten the bolt back up.. Q: Is it difficult to install these on the car? A: No, it's a very simple job that takes about five minutes per door. You just need a wrench to remove the single bolt holding the factory bushing, swap this one in its place, and tighten the bolt back up.. Q: Is it difficult to install these on the car? A: No, it's a very simple job that takes about five minutes per door. You just need a wrench to remove the single bolt holding the factory bushing, swap this one in its place, and tighten the bolt back up.. Q: Does the shape of this part help with door closing? A: Yes, it has a slight taper bushing design. This shape helps guide the door into the latch for a more secure closure, ensuring a snug fit that reduces vibrations while you drive.. Q: Does the shape of this part help with door closing? A: Yes, it has a slight taper bushing design. This shape helps guide the door into the latch for a more secure closure, ensuring a snug fit that reduces vibrations while you drive.. Q: Does the shape of this part help with door closing? A: Yes, it has a slight taper bushing design. This shape helps guide the door into the latch for a more secure closure, ensuring a snug fit that reduces vibrations while you drive..

Door Taper Bushing | Secure Machined Fit | For NA NB NC ND 1990-2021

Questions about this product

Compare with similar products

Popular in Industrial & Machinery

Solenoid Valve | 12V/24V/220V NC | 1/2 & 3/4 for Water & Air

608ZZ Skateboard Bearings | Double Metal Shield | 8x22x7mm 10-Pack

Door & Window Magnetic Sensor | Zigbee Wireless | App Alert Security Alarm

Pneumatic Fitting Push-In Connectors | Air Hose Quick Release | 4-14mm Tube

Sensor | Waterproof 304 Stainless Steel Probe | 6x30mm 1M Cable

Hydraulic Valve | 1/2 Float for Tank Water Level Control

Flute End Mill | Solid Carbide with DLC Coating | For Aluminum CNC

Hose Fitting | Quick Release Push to Connect | 1/4 NPT Elbow

TUYA WiFi/ZigBee MCB Smart Circuit Breaker Over Current Under Voltage Protection Power Metering 1-63A Remote Control Switch

Push-to-Connect Air & Water Fittings | 4mm-12mm OD | Quick-Release Hose Couplings

Radiator Cleaning Brush | Flexible Long Thin Duster | Dryer Duct Cleaner

Fitting | 304 Stainless Steel Compression | 1/2 NPT Union

Accessories & add-ons

Sensor Protection Sleeve | Stainless Steel Blind Tube | 6mm

Motion Sensor Bracket | Automatic IR Lamp Holder | 110-240V AC

Soil Moisture NPK Sensor | 7-in-1 Agricultural Probe Accessory

Arduino Raspberry Pi Sensor Kit (45pc) | Modules for UNO R3 MEGA2560

Reflector Plate | Photoelectric Sensor Accessory | TD Series

Load Cell ADC Module | 24-Bit HX711 Sensor Accessory

Bending Strain Gauge Amplifier Module | Sensor Accessories UK