The East Tester ET5410A+ Programmable DC Electronic Load delivers precise, high-power testing with 150V/500W and 40A/400W capabilities per channel. This dual-channel meter battery capacity tester offers exceptional flexibility for engineers and technicians requiring reliable, programmable load simulation for R&D, production, and quality assurance workflows. Features and Benefits
- Dual-Channel Independent Operation - Test two separate DC sources or batteries simultaneously, doubling testing efficiency and saving valuable bench space.
- High-Power 500W/150V & 400W/40A Ranges - Handle a wide spectrum of power supplies, battery packs, and DC sources from low-voltage high-current to high-voltage applications.
- Programmable Dynamic Load Testing - Simulate real-world operating conditions with CC, CV, CR, and CP modes to accurately measure capacity, discharge curves, and source stability.
- Comprehensive Data Display & Analysis - Large LCD clearly shows voltage, current, power, capacity, and time, providing all critical data at a glance for informed decision-making.
- Robust Construction with Cooling Fan - Ensures stable, continuous operation under full load, making it a reliable choice for extended testing sessions and demanding environments. Applications
- Battery Pack Capacity & Cycle Testing - Precisely determine the true mAh/Ah capacity and health of Li-ion, LiPo, NiMH, and lead-acid batteries for quality control or refurbishment.
- DC Power Supply Validation - Test and characterize switching power supplies, adapters, and solar regulators under dynamic load conditions to verify performance specifications.
- Educational & R&D Prototyping - An excellent value tool for engineering labs and hobbyists to learn power electronics principles and test prototype circuits reliably.
- Field Service & Repair Diagnostics - Verify the output of vehicle alternators, UPS systems, and other DC power sources during maintenance and troubleshooting procedures.
Maximum Input Power: 500 W (ET5410A+, ET5420A+), 400 W (ET5411A+). Maximum Input Voltage: 150 V. Display: Digital LCD. Programming Interface: USB, RS-232. Application: Battery Testing, Power Supply Testing, Solar Panel Testing, Component Burn-in. Channels: 1 (ET5410A+, ET5411A+), 2 (ET5420A+). Cooling Method: Forced Air (Fan). Maximum Input Current: 40 A. Measurement Functions: Voltage, Current, Power, Capacity (Ah), Energy (Wh). Model: ET5410A+, ET5411A+, ET5420A+. Operating Mode: Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP). Protection Features: Over Voltage Protection (OVP), Over Current Protection (OCP), Over Power Protection (OPP), Over Temperature Protection (OTP), Reverse Polarity Protection. Type: Programmable DC Electronic Load / Battery Capacity Tester. Dimensions (Approx.): 220 x 100 x 350 mm (Standard Bench-Top Instrument Size). Weight (Approx.): 5 kg. Battery Test Mode: Capacity (Ah/Wh) and Discharge Testing. Maximum Input Power: 500W (ET5410A+), 400W (ET5420). Maximum Input Voltage: 150 VDC. Minimum Operating Voltage: 0.5V (Typical for electronic loads). Voltage Measurement Accuracy: ±(0.05% + 0.05% of range). Load Operation Modes: Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP). Interface: USB, RS-232 (Typical for programmability). Channels: Single or Dual Channel (Model Dependent). Cooling Method: Active Forced Air Cooling with Fan. Current Measurement Accuracy: ±(0.1% + 0.1% of range). Display: Digital LCD or TFT Display. Input Connectors: High-Current Banana Jacks or Binding Posts. Maximum Input Current: 40A. Model: ET5410A+, ET5411A+, ET5420A+. Product Type: Programmable DC Electronic Load / Battery Capacity Tester. Programming: SCPI Command Support. Protections: Over Voltage Protection (OVP), Over Current Protection (OCP), Over Power Protection (OPP), Over Temperature Protection (OTP), Reverse Polarity Protection. Q: What are the key specifications of the East Tester ET5410A+ programmable DC electronic load? A: The East Tester ET5410A+ is a single/dual channel meter with a maximum input of 150V, 40A, and 500W. It is designed for battery capacity testing and other DC load applications, offering programmable control for precise measurements.. Q: Is the East Tester ET5410A+ electronic load durable enough for professional workshop use? A: Yes, it is built with robust electrical components suitable for regular use in workshops and labs. The design focuses on reliable performance for tasks like battery testing and power supply validation.. Q: Can I use the ET5410A+ to test lithium-ion battery packs for e-bikes or solar systems? A: Absolutely. With its 150V/40A/500W capability, this battery capacity tester is well-suited for testing higher-voltage battery packs, including those for e-bikes, power tools, and small solar storage systems.. Q: Does this programmable DC electronic load come with a warranty? A: Warranty details are typically provided by the seller at the point of purchase. We recommend checking the specific warranty terms offered with your order for coverage information.. Q: Is the East Tester ET5410A+ a good value compared to other electronic loads? A: Yes, this offers excellent value for DIY enthusiasts and professionals seeking quality without premium brand pricing. It delivers reliable performance for regular use with its programmable features and robust power ratings..