Carving Fibre Sanding Discs | 125mm Bevel | Angle Grinder Shaping

This 125mm wood carving disc for an angle grinder removes wood fast. It lets you shape and plane wood with good control. The disc's sharp tungsten carbide teeth carve, sculpt, and bevel quickly. It fits right onto your standard 5-inch angle grinder, so you can use it right away. Features and Benefits - Many sharp teeth - The rough surface removes wood much faster than sanding discs. - Tungsten carbide build - The teeth stay sharp for a long time, even on hard woods. - 125mm plane bevel shape - It gives you a flat surface for planing and an edge for detailed shaping or angled cuts. - 22.23mm bore - This is a common size that fits most 125mm (5-inch) angle grinders without needing adapters. Applications - Use this wood shaping disc to hollow out wooden bowls or make custom furniture parts. - Quickly take bark off logs or level high spots on rough-cut timber. - Sculpt large wood art or add texture to beams and posts. Step 1: Mount the Sanding Disc to the Mandrel The Carving Fibre Sanding Discs are designed for use with an angle grinder. These 125mm bevel discs are for shaping and sanding wood. They are not compatible with Dremel tools. For angle grinder usage, ensure your chosen backing pad is suitable for fibre discs and securely holds the disc during operation. This prevents slippage and ensures consistent material removal. Always check the maximum RPM rating of your angle grinder and ensure it is appropriate for the disc’s specifications to avoid damage or injury. Option A: Standard Screw Mandrel (402) This section is not applicable as the Carving Fibre Sanding Discs are designed for angle grinders, not Dremel tools requiring a standard screw mandrel. When using fibre discs on an angle grinder, the disc typically attaches directly to a compatible backing pad, which then secures to the angle grinder’s spindle. A standard screw mandrel is not part of this setup. Ensure the backing pad’s thread matches your angle grinder’s spindle for a secure fit. Option B: EZ Lock Mandrel (EZ402) This section is not applicable as the Carving Fibre Sanding Discs are designed for angle grinders, not Dremel tools utilising an EZ Lock mandrel. For angle grinder applications, the fibre disc is secured to a backing pad, which in turn attaches to the angle grinder. The EZ Lock system is specific to Dremel rotary tools and is not compatible with these 125mm fibre discs. Always use the correct attachment method for your angle grinder and disc type. Step 2: Insert the Mandrel into Your Dremel This section is not applicable as the Carving Fibre Sanding Discs are for angle grinders, not Dremel tools. To use these 125mm bevel discs, you will need to securely attach them to a compatible backing pad on your angle grinder. Ensure the angle grinder is unplugged or its battery removed before attempting to fit any accessories. Follow your angle grinder's manual for proper disc installation, ensuring the retaining nut is tightened correctly to prevent the disc from coming loose during operation. Step 3: Best Practices for Sanding When using these Carving Fibre Sanding Discs for wood polishing, carving, or sanding with an angle grinder, always wear appropriate personal protective equipment, including eye protection and gloves. Start with a lower grit for aggressive material removal, such as 80 grit, and progress to finer grits like 220 grit for a smoother finish. Apply consistent, light pressure and keep the angle grinder moving to avoid swirl marks and gouging the wood. For optimal results, avoid excessive heat build-up which can burn the wood and shorten disc life.