Dell Hard Drive Caddy | 2.5-inch SAS/SATA Tray | For PowerEdge R730 R630

This is a 2-pack of the Dell 08FKXC 2.5'' SAS SATA hard drive caddy. A server caddy securely installs a 2.5-inch drive into your server's hot-swap bay. This Dell 8FKXC hard drive bracket fits and connects correctly in compatible PowerEdge systems. Features and Benefits - Supports 2.5" SAS & SATA drives - This 2.5 inch SAS SATA server caddy works with both drive types. This gives you options for your server setup. - Made for PowerEdge servers - It fits specific Dell servers. These include the PowerEdge R730, R630, T640, and T630 models. - Hot-swap ready - The Dell 08FKXC hot-swap caddy lets you add or remove drives while the server runs. This helps avoid downtime. - Mounting screws included - The package comes with four screws. These are needed for installing a 2.5 inch SAS SATA drive in each Dell 08FKXC caddy. Applications - Add storage or faster SSDs to your server using this Dell PowerEdge hard drive tray 8FKXC. - It's a direct replacement for a missing or broken Dell PowerEdge R630 2.5 inch hard drive caddy. This makes a drive bay usable again. - It's hardware for system administrators. They can use it to build or reconfigure servers and mount new drives safely. What It Is This is a Dell Hard Drive Caddy, designed to house a 2.5-inch SAS or SATA drive. It is made from metal and is compatible with specific Dell PowerEdge server models including the R730 and R630. The caddy acts as a tray for the drive, allowing it to be securely installed and removed from the server. It supports drives with a maximum capacity of 1 TB. Key Uses & Applications This caddy is used to install 2.5-inch SAS or SATA hard drives into compatible Dell PowerEdge servers. It provides a secure mounting point for the drive within the server's bay. A SATA cable is used to connect the drive to the server's motherboard, transmitting data. A separate power cable supplies electricity to the drive. The caddy ensures proper alignment for the drive's pin connector with the server's backplane. How to Choose When selecting a hard drive caddy, ensure it matches the form factor of your drive; this caddy is for 2.5-inch drives. Verify compatibility with your server model; this caddy fits Dell PowerEdge R730 and R630, among others. Consider the interface type of your drive, as this caddy supports both SAS and SATA. Ensure the maximum drive capacity of 1 TB is sufficient for your needs. The shaped connector on the drive will fit the corresponding data cable.