Finger Belt Sander | For 10x330mm Belts | Adjustable Speed Grinding

This pneumatic finger belt sander reaches into tight spaces. It's a light air belt sander (10x330mm) that runs on a standard 90 PSI compressor. The narrow head works for detail jobs like grinding welds, deburring edges, and cleaning castings. Features and Benefits - 10mm wide sanding arm - Gets into tight corners and along narrow channels for exact material removal. - Rear exhaust - Directs air away from you and your work, keeping the surface clean. - Paddle throttle with safety latch - Gives you precise control over sanding speed and prevents accidental starts. - Simple belt tension lever - Lets you change sanding belts in seconds without needing other tools. Applications - For car body repair, this air file belt sander smooths welds and removes rust from chassis parts. - In metalworking, use this handheld air belt sander (10x330mm) to deburr cut edges and finish fabricated components. - For restoration work, it strips paint or corrosion from intricate metalwork or hardware. Handheld Corded Belt Sanders For continuous, high-power sanding tasks, corded belt sanders are a reliable choice. These tools typically offer consistent performance without the need for battery changes, making them suitable for prolonged use in workshops or on site where mains power is accessible. While this Finger Belt Sander uses a pneumatic power source, corded models are common for larger belt sizes and general material removal. They are often used for preparing surfaces, removing old finishes, or shaping wood, and can be found with various belt widths and motor outputs. Handheld Cordless Belt Sanders Cordless belt sanders provide portability and freedom from power outlets, ideal for working in remote locations or where power access is limited. They operate on rechargeable batteries, offering convenience for smaller jobs or touch-ups. While the product described is pneumatic, cordless belt sanders are available for similar applications where manoeuvrability is key. Battery life and power output vary between models, impacting sustained use. They are generally suited for lighter sanding tasks compared to their corded or pneumatic counterparts. Benchtop & Stationary Belt/Disc Sanders Benchtop and stationary belt/disc sanders are robust machines designed for precision and stability in a workshop setting. They are typically used for shaping, sharpening, and finishing workpieces, offering a stable platform for consistent results. Unlike a handheld Finger Belt Sander, these units remain fixed, allowing the user to bring the material to the sanding surface. They often feature larger motors and can accommodate a wider range of belt and disc sizes, making them versatile for various materials and tasks. Method 1: Handheld Belt Sander (Sanding Belt) To effectively use a handheld belt sander, such as this adjustable speed Finger Belt Sander, first ensure the correct 330 x 10 mm belt is fitted and tracking correctly. Start with a lower grit, like 80 grit, for material removal, then progress to finer grits such as 120, 400, 600, or 800 grit for a smoother finish. Apply even pressure and move the sander smoothly along the workpiece, avoiding dwelling in one spot to prevent gouging. For adjustable angle models, set the angle appropriate for the task. Always wear appropriate safety gear. Method 2: Replacing an Internal Drive Belt (Handheld or Stationary) Replacing an internal drive belt on a belt sander (not the sanding belt itself) typically involves disassembling part of the tool's housing to access the motor and drive mechanism. This is a maintenance task for the tool's internal workings, not related to the consumable sanding belt. For a specific model, consult the manufacturer's manual for instructions on how to change belt sander craftsman or other brands. Ensure the power source is disconnected before attempting any internal repairs. This Finger Belt Sander uses a pneumatic power source, so internal belt replacement would be a specialist repair.