Proximity Sensors
Sensor Reed Switch | 2x14mm Normally Open (N/O) | 10-Pack for DIY
TBS-06062SENS-00026
$5.95
Industrial & Machinery
1899 products available
Looking for industrial machinery parts that hold up in daily use? Compel stocks hydraulic fittings, pneumatic fittings, lifting equipment and automation components for plant, workshop and site maintenance.
The range runs from hydraulic pipe benders and high-pressure diaphragm pumps to recovery winches, pallet wrappers and CNC spares. We supply maintenance crews and machine builders who need machinery parts on spec and on time. Every product ships fast worldwide, with trade pricing and Pro discounts on repeat volumes.
1899 products in Industrial & Machinery
Proximity Sensors
Proximity Sensor Switch | 12V-24V 5A for Cabinet Lights | Door Activated
TBS-06061SENS-00025
$11.99
Taper Bushings
5M Keyless Taper Bushing Pulley | 18T-22T | For 15/20mm Belts
CMP-04473TAPE-00001
$30.95
Taper Bushings
Door Taper Bushing | Secure Machined Fit | For NA NB NC ND 1990-2021
CMP-04475TAPE-00002
$36.95
Air Cylinders
Pneumatic Cylinder Fittings | Push-Fit Air Line Connectors | 4-12mm PU PY PE PV PM SA
CMP-04504AIRC-00001
$4.49
Taper Bushings
Taper Bushing | Oil-Impregnated Copper | 10mm to 20mm Bore
CMP-04507TAPE-00003
$5.95
Air Cylinders
Cylinder Air Hose | 8x5mm Polyurethane Tube | For Air Compressors
CMP-04513AIRC-00002
$1.49
Turning Inserts
Carbide Insert | Grooving & Parting Blade | For CNC Metal Lathe
CMP-04525TURN-00001
$20.95
Turning Inserts
Carbide Insert | For Steel CNC Turning | CCMT060204 & CCMT09T304 Pack
CMP-04529TURN-00002
$24.95
Turning Inserts
Carbide Insert | PC9030 Coated | For Metal Lathe Parting & Grooving
CMP-04530TURN-00003
$25.95
End Mills
Flute End Mill | DLC Coated Bit | 3.175mm-8mm for Aluminum CNC
CMP-04531ENDM-00001
$9.95
End Mills
4 Flute Carbide End Mill | HRC65 Hardness | CNC Tungsten Steel Cutter Bit
CMP-04533ENDM-00002
$10.99
End Mills
Flute End Mill | Solid Carbide with DLC Coating | For Aluminum CNC
CMP-04534ENDM-00003
$13.99
Solenoid Valves
Solenoid Valve | Normally Closed Brass Body | 12V 24V 220V Water Air
CMP-04535SOLE-00001
$15.99
Quick Couplers
Hydraulic Coupler | M5-4mm Oil Connector | For RC Model Oil Cylinder
CMP-04536QUIC-00001
$28.95
Air Line Fittings
Air Hose Fitting | European Standard Quick Release | Pneumatic Compressor Coupling
CMP-04537AIRL-00001
$3.49
Solenoid Valves
Valve 1/4 | Normally Closed 12V DC | For Air, Water, or Oil
CMP-04538SOLE-00002
$10.99
Air Line Fittings
Hose Fitting | Quick Release Push to Connect | 1/4 NPT Elbow
CMP-04539AIRL-00002
$2.49
Air Cylinders
Pump Sprayer with Pneumatic Cylinder | 2L Foam Cannon | 3 Nozzle Set
CMP-04540AIRC-00003
$30.95
Solenoid Valves
Solenoid Valve | 12V/24V/220V NC | 1/2 & 3/4 for Water & Air
CMP-04541SOLE-00003
$11.99
Air Line Fittings
Air Hose Fitting | Quick Release Connector | 1/4 BSPT Thread
CMP-04542AIRL-00003
$2.49
Shaft Couplings
Shaft Coupling System | 6mm Handpiece | For Rotary Tool Engraving
CMP-04543SHAF-00001
$29.95
Hydraulic Hose
Hydraulic Hose Barb Fittings | 304 Stainless Steel Elbow & Tee Splitters | Water Gas Connectors
CMP-04544HYDR-00350
$4.49
Pneumatic Fittings
10x Pneumatic Fitting | 4-12mm Push-Fit Connector | Air Hose & Tube
CMP-04545PNEU-00001
$5.95
Pneumatic Fittings
Pneumatic Fitting Quick Release | 304 Stainless Steel BSP | Push-in Hose Connectors
CMP-04546PNEU-00002
$3.49
Pneumatic Fittings
Pneumatic Fitting Push-In Connectors | Air Hose Quick Release | 4-14mm Tube
CMP-04547PNEU-00003
$2.49
Quick Couplers
Hydraulic Coupler Transition Joint | BSP to Metric Thread Adapter | External Cone
CMP-04548QUIC-00002
$7.95
Hydraulic Hose
Hose Plug Set | Brake Line Block Off Caps | Auto Repair Maintenance
CMP-04549HYDR-00351
$21.95
Showing page 17 of 68 (1899 products)
Matching Hydraulic and Pneumatic Fittings to the System
Fittings fail at the interface, so start with thread standard and working pressure. Most equipment in our range uses BSP or NPT threads, and mixing the two strips seals. Check the rated bar or PSI of the circuit and buy fittings rated above the relief valve setting, not at it.
- Confirm thread type and size from the component datasheet before ordering adapters.
- For pneumatics, quick-release couplings save service time on lines opened often.
- Use steel fittings for hydraulic pressure lines; brass suits low-pressure air and water.
Sizing Lifting Equipment With a Real Safety Margin
Winches, hoists and lifting stools are rated by working load limit. Size against the heaviest realistic load plus rigging weight, then step up one rating. A 12V or 24V recovery winch rated 3500 to 4500 lb covers most vehicle and trailer work; powered lifting platforms for tile and plastering trades list both load and lift height.
- Never size a lift at 100 percent of the working load limit; keep at least a 25 percent margin.
- Match winch voltage to the vehicle system that will drive it.
- Check duty cycle: intermittent-rated gear overheats in continuous use.
Choosing Automation Components That Integrate Cleanly
Automation components pay off when they match the control voltage and signal type you already run. Proximity sensors, limit switches and relays in this department cover common 12V, 24V and mains-switched circuits, and IP67-rated switchgear survives washdown areas.
- Standardize on one control voltage across a machine to simplify spares.
- Pick IP67 or better for anything exposed to coolant, dust or outdoor duty.
- Keep one spare of every sensor type in the machine; downtime costs more than the part.
Buying guide
Choosing Industrial & Machinery
- What is the difference between BSP and NPT hydraulic fittings?
- BSP threads seal on a 55-degree flank angle and usually a bonded washer or cone seat, while NPT threads are 60-degree tapered and seal on the thread itself with sealant. They are not interchangeable: an NPT male in a BSP port will bind and leak. Check the equipment datasheet and match the standard exactly.
- How do I choose the right working load limit for lifting equipment?
- Add the load weight and all rigging, then select equipment whose working load limit sits comfortably above that total, with at least a 25 percent margin. For repeated daily lifts, step up a rating class so the gear never works at its ceiling.
- Do you stock replacement machinery parts for CNC and manufacturing equipment?
- Yes. The Manufacturing & CNC section covers spares like spindles, couplings, linear components and controller modules, and the Industrial Electrical Components section covers switches, contactors and terminal hardware. If a listing does not show the spec you need, the product Q&A on each page is the fastest way to confirm fit.
- Are your pneumatic fittings suitable for compressed air tools?
- Yes. Standard quick-release couplings and push-in fittings in the range are rated for typical workshop compressor pressures. Check each listing for the rated bar and the tube diameter, and use thread sealant on tapered threads for a dry-air seal.
- Can I get trade pricing on industrial machinery parts?
- Yes. Every product shows standard pricing, and Pro members get tiered member pricing up to 25 percent off plus NET-30 terms for registered businesses. Volume needs beyond a listing are handled through the B2B contact on the site.