Tool Fibre Sanding Discs | Flap Wheel Kit with Mandrel | 80 Grit

This flap wheel disc set is for detailed work with your rotary tool. Unlike flat fiber sanding discs, these flexible flaps bend to fit curves and uneven shapes. The kit comes with 10 wheels in grits from 80 to 600, plus a mandrel to help you start right away. Features and Benefits - Flap design - The separate abrasive flaps bend to sand contours and profiles without digging in or making flat spots. - Aluminum oxide grit - This abrasive works well for sanding and polishing both metal and wood. - Wide grit range - The set goes from 80 grit for removing material up to 600 grit for fine sanding. - Included 3.175mm mandrel - The shank fits directly into the collet of most common rotary tools, including Dremel models. Applications - Rust and paint removal - Use a coarse 80 grit flap wheel to strip corrosion or old paint from small metal parts. - Woodworking details - Smooth out intricate carvings, sand inside tight spaces, or shape small wooden pieces. - Metal polishing preparation - Work through the grits to smooth out tool marks and get metal hardware ready for a final polish. Step 1: Mount the Sanding Disc to the Mandrel This product includes 1 mandrel for attaching your sanding discs. Proper mounting ensures safety and effective sanding. The included fibre sanding discs are designed to be securely fastened to the mandrel. This step is crucial before using your rotary tool. Ensure the disc is centred and tightly secured to prevent wobbling during operation. A correctly mounted disc will provide consistent results and extend the life of your sanding disc. Option A: Standard Screw Mandrel (402) For a standard screw mandrel, the sanding disc is typically secured by a small screw. Place the fibre sanding disc onto the mandrel's shaft, ensuring the centre hole aligns. Then, thread the screw through the disc and into the mandrel, tightening it firmly. This method provides a secure fit for your 10 pieces of fibre sanding discs. Always double-check the tightness before operating your rotary tool to avoid the disc detaching during use. Option B: EZ Lock Mandrel (EZ402) While this product specifies a single mandrel is included, some rotary tool systems feature an EZ Lock mandrel. These are designed for quick and easy disc changes. If you were using an EZ Lock system, you would typically pull back a spring-loaded collar, insert the sanding disc, and then release the collar to lock it in place. This allows for rapid swapping of different grit discs, such as switching between an 80 grit and a finer grit for finishing. Step 2: Insert the Mandrel into Your Dremel Once the fibre sanding disc is securely attached to the mandrel, insert the mandrel into the collet of your rotary tool. Tighten the collet nut firmly to ensure the mandrel is held without any play. A loose mandrel can lead to vibrations, poor sanding results, and potential damage to the tool or workpiece. Confirm the mandrel is fully seated in the collet before starting your rotary tool. This product is compatible with rotary tools. Step 3: Best Practices for Sanding When using your Tool Fibre Sanding Discs, apply light, even pressure. Excessive force can cause premature wear to the 80 grit disc and lead to swirl marks on your material. Move the rotary tool consistently across the surface. For prolonged sanding, a hook and loop backing pad can sometimes be used with compatible discs for easier changes, though these discs are designed for a mandrel. These sanding discs are not hook and loop. The lifespan of a sanding disc depends on the material being sanded and the pressure applied. Regularly inspect the disc for wear and replace it when the abrasive material is no longer effective.