Face Protection
Face Shield with Clear Visor | Anti-Fog Coating | For Grinding
CMP-04470FACE-00001
£32.99
Face Protection
2 products available
Face protection PPE provides a barrier against workplace hazards in construction and building. This category includes industrial face shields and protective visors designed to guard against impact from flying debris, chemical splashes, and dust. These safety face guards offer full face protection, shielding the eyes, nose, and mouth from injury during tasks like grinding, cutting, and mixing materials.
Compel supplies a focused selection of industrial-grade face shields for professional use. Our range is built around proven materials like impact-resistant polycarbonate. We provide the technical specifications you need to match the right protection to your specific job site application. Choose Compel for reliable face protection that meets the demands of your work.
2 products in Face Protection
Select a Visor Material for Your Application
The material of a protective visor determines its impact resistance and suitability for certain tasks. Polycarbonate is the standard for industrial applications like grinding and cutting due to its high impact strength. It effectively stops chips and particles generated by power tools.
For other components of the assembly, like headgear, materials such as stainless steel may be used for their durability and corrosion resistance. When selecting a face shield, always prioritize the visor material based on the primary hazard you will face. Polycarbonate offers the best combination of optical clarity and impact protection for most construction tasks.
Consider Features like Anti-Fog Coatings
Maintaining clear vision is as important as impact protection. Changes in temperature and humidity, or exertion from physical labor, can cause a visor to fog up, creating a serious safety risk. Look for face shields with an anti-fog coating to ensure visibility remains unobstructed.
An effective anti-fog coating is applied directly to the visor and helps prevent condensation from forming. This feature is especially useful in varied weather conditions or when wearing a dust mask or respirator. It allows you to focus on the task without needing to constantly stop and clear your visor.
Buying guide
Choosing Face Protection
- What is the best material for a safety face guard visor?
- For construction and industrial work, polycarbonate is the preferred material for visors. It provides superior impact resistance against flying debris from tasks like grinding or cutting. Always verify the material is appropriate for your specific workplace hazards.
- Can any face shield be used for grinding tasks?
- No. Grinding requires a face shield with a high impact rating, which is typically made from polycarbonate. Using a general-purpose or chemical splash shield for grinding does not provide adequate protection. Check the product's specifications for its intended applications.
- Are these face shields industrial rated, for example to ANSI Z87.1?
- Industrial face shields are often certified to specific safety standards like ANSI Z87.1, which designates impact resistance levels. Since compliance varies by product, you must check the datasheet for the exact standard and rating before purchasing.
- Will these full face protection shields fit over prescription glasses or respirators?
- Most industrial face shields are designed with enough clearance to be worn over standard prescription safety glasses and many types of half-mask respirators. However, fit is not universal. We recommend checking the product's design and dimensions to confirm compatibility with your other PPE.
- How should I clean a face shield with an anti-fog coating?
- Clean the visor using a soft cloth with mild soap and water or a manufacturer-approved lens cleaning solution. Avoid harsh chemicals or abrasive materials, as they can scratch the visor and damage the anti-fog coating. Replace the shield if it becomes deeply scratched or cracked.