This 2-inch quick change flap disc is for fast grinding, deburring, and surface blending in tight spots. Its roll lock backing lets you change discs instantly on a die grinder. It removes material quickly to get a surface ready that can later be smoothed with finer abrasives or buffing pads. Features and Benefits
- Zirconia Alumina abrasive flaps - Stays sharp as it wears down, giving a long life and consistent cut on steel.
- Quick change roll lock system - Allows for fast, tool-free disc changes to cut down on downtime.
- Overlapping flap design - Grinds and finishes the surface at the same time, reducing steps in the process.
- Comes with 1/4" shank holder - Attaches the disc to any standard die grinder or drill right out of the box. Applications
- Grinding and blending welds in tight corners on metal frames.
- Removing gaskets, rust, or paint from engine parts.
- Deburring and chamfering the edges of freshly cut steel plate.
Local Brick-and-Mortar Stores
You can often find buffing pads and flap discs at local hardware stores, particularly those that cater to tradespeople. Look for shops specialising in welding supplies or metal fabrication tools, as they are more likely to stock Zirconia Alumina flap discs with a 2 inch diameter and Roll Lock attachment. These stores can be useful for quickly picking up specific grit sizes, such as 40, 60, 80, or 120, for immediate project needs. Remember to check for compatibility with your existing pad holder and 1/4 inch shank diameter.
Online General Retailers
Major online retailers in the UK offer a wide selection of buffing pads and flap discs. When searching, focus on the "Buffing Pads" category and filter by "Flap Disc" and "Roll Lock" attachment. Ensure the abrasive material is Zirconia Alumina for metal grinding applications. These platforms are good for comparing different grit ranges and ensuring the 2 inch disc diameter matches your requirements. While they sell polishing pads, specific cleaning instructions for wool polishing pads or how to wash polishing pads are generally found in product descriptions or manufacturer guidelines.
Specialty Auto Detailing Suppliers
While this product is for metal grinding, auto detailing suppliers do offer a range of polishing pads. If you are looking for where to buy polishing pads for vehicle surfaces, these suppliers are ideal. They stock various types of polishing pads, including those for removing swirl marks or working on clear coat finishes. For cleaning, many auto detailing suppliers provide specific cleaning solutions for how to wash polishing pads, including instructions for cleaning wool polishing pads to maintain their effectiveness with dual-action polishers.
Quick Buying Tip
When selecting these 2 inch Roll Lock Flap Discs, always match the Zirconia Alumina abrasive material to your metal grinding task. The grit range is crucial: use 40 or 60 grit for aggressive material removal, 80 grit for general grinding, and 120 grit for finer finishing. Ensure your pad holder is compatible with the Roll Lock attachment and has a 1/4 inch shank diameter. Check the product description for any specific recommendations on RPM or usage for optimal performance and safety.
Abrasive Material: Zirconia Alumina. Attachment Type: Roll Lock. Disc Diameter: 2 inch. Disc Type: Flap Disc. Grit Range: 40, 60, 80, 120. Holder Type: Pad Holder. Shank Diameter: 1/4 inch. Disc Diameter: 2 inches (50.8 mm). Shank Diameter: 1/4 inch (6.35 mm). Abrasive Material: Zirconia Alumina. Backing Material: Heavy-duty cloth. Application: Grinding, deburring, blending, finishing. Attachment System: Roll Lock (Quick Change). Disc Shape: Flat. Disc Type: Flap Disc. Grit Options: 40 grit, 60 grit, 80 grit, 120 grit. Included Components: Flap Sanding Disc, 1/4" Shank Pad Holder. Intended Use: Home DIY. Keyword Target: buffing pads. Maximum RPM: 25,000 RPM (typical for 2-inch discs). Product Name: 2 Inch Quick Change Flap Disc 40/60/ 80/120 Grit, Roll Lock Flap Sanding Disc with 1/4" Shank Pad Holder, Zirconia Alumina Flat. Q: What comes in this flap disc set? A: The kit includes a variety of 2-inch flap discs with different grits: 40, 60, 80, and 120. It also comes with the roll lock backing pad that has a 1/4-inch shank for your tool.. Q: What comes in this flap disc set? A: The kit includes a variety of 2-inch flap discs with different grits: 40, 60, 80, and 120. It also comes with the roll lock backing pad that has a 1/4-inch shank for your tool.. Q: What comes in this flap disc set? A: The kit includes a variety of 2-inch flap discs with different grits: 40, 60, 80, and 120. It also comes with the roll lock backing pad that has a 1/4-inch shank for your tool.. Q: What comes in this flap disc set? A: The kit includes a variety of 2-inch flap discs with different grits: 40, 60, 80, and 120. It also comes with the roll lock backing pad that has a 1/4-inch shank for your tool.. Q: What's the abrasive material on these discs? A: These discs use a zirconia alumina abrasive. This material is self-sharpening as it wears, which means it cuts consistently and has a longer working life, especially on steel and other metals.. Q: What's the abrasive material on these discs? A: These discs use a zirconia alumina abrasive. This material is self-sharpening as it wears, which means it cuts consistently and has a longer working life, especially on steel and other metals.. Q: What's the abrasive material on these discs? A: These discs use a zirconia alumina abrasive. This material is self-sharpening as it wears, which means it cuts consistently and has a longer working life, especially on steel and other metals.. Q: What's the abrasive material on these discs? A: These discs use a zirconia alumina abrasive. This material is self-sharpening as it wears, which means it cuts consistently and has a longer working life, especially on steel and other metals.. Q: How do I attach these to my die grinder? A: They use a quick-change roll lock system. You just twist the disc onto the included holder, and then the holder's 1/4-inch shank goes into the collet of your die grinder or drill, just like a regular bit.. Q: How do I attach these to my die grinder? A: They use a quick-change roll lock system. You just twist the disc onto the included holder, and then the holder's 1/4-inch shank goes into the collet of your die grinder or drill, just like a regular bit.. Q: How do I attach these to my die grinder? A: They use a quick-change roll lock system. You just twist the disc onto the included holder, and then the holder's 1/4-inch shank goes into the collet of your die grinder or drill, just like a regular bit.. Q: How do I attach these to my die grinder? A: They use a quick-change roll lock system. You just twist the disc onto the included holder, and then the holder's 1/4-inch shank goes into the collet of your die grinder or drill, just like a regular bit.. Q: Are these for polishing like other buffing pads? A: No, these are for grinding and stock removal, not polishing. They are much more aggressive than buffing pads and are used for tasks like removing welds, deburring sharp edges, and shaping metal.. Q: Are these for polishing like other buffing pads? A: No, these are for grinding and stock removal, not polishing. They are much more aggressive than buffing pads and are used for tasks like removing welds, deburring sharp edges, and shaping metal.. Q: Are these for polishing like other buffing pads? A: No, these are for grinding and stock removal, not polishing. They are much more aggressive than buffing pads and are used for tasks like removing welds, deburring sharp edges, and shaping metal.. Q: Are these for polishing like other buffing pads? A: No, these are for grinding and stock removal, not polishing. They are much more aggressive than buffing pads and are used for tasks like removing welds, deburring sharp edges, and shaping metal.. Q: What do the different grit numbers like 40 and 120 mean? A: The grit number indicates the coarseness of the abrasive. A low number like 40 is very coarse and removes material quickly, while a high number like 120 is finer and used for smoother finishing and blending.. Q: What do the different grit numbers like 40 and 120 mean? A: The grit number indicates the coarseness of the abrasive. A low number like 40 is very coarse and removes material quickly, while a high number like 120 is finer and used for smoother finishing and blending.. Q: What do the different grit numbers like 40 and 120 mean? A: The grit number indicates the coarseness of the abrasive. A low number like 40 is very coarse and removes material quickly, while a high number like 120 is finer and used for smoother finishing and blending.. Q: What do the different grit numbers like 40 and 120 mean? A: The grit number indicates the coarseness of the abrasive. A low number like 40 is very coarse and removes material quickly, while a high number like 120 is finer and used for smoother finishing and blending.. 
